Parker Products COMPAX-M /-S (L) manual MOK42 max ,8A, Packaging of device, Material, Procedure

Start-up manual	COMPAX-M / -S
Resolver / SinCos

Motor cable for HJ and HDY – motors

MOK42 (max. 13,8A)

110 mm 75 mm

30 mm 30 mm

MOK42

30 mm

Shrink-fit hose

standard/highflex standard/hochflex

U	black1/black	sw1/sw	1	U
V	black2/brown	sw2/br	2	V
W	black3/blue	sw3/bl	6	W
Br. +24V	black4/red	sw4/rt	4	Br+
Br. -24V	black5/green	sw5/gr	5	Br-
	black6	sw6
PE	green-yellow	gn/ge	3

Lötseite / Crimpseite

6

51

4

3()

15 mm

10 mm

110 mm

35 mm75 mm

CY-JZ 7x1,5 No 102-508896

Version in high-flex: MOK44 (same layout)

MOK43/.. (max. 18.9A): HJ (version in high-flex: MOK45)

Layout corresponds to MOK42, however motor lines in 2.5 mm2

Packaging

Packaging of motor in accordance with connector manufacturer's specification

Contacts for 1.5 mm2 and 2.5 mm2 are supplied with the connector set.

Packaging of device

Material:

•6 x crimping sleeves.

•6 cm shrink-fit hose.

Procedure:

•Strip 110 mm sheathing off cable.

•Cut down sheath to approx. 35 mm, loosen,

•fold back over outer cover (approx. 75 mm) and stick with insulating tape.

•Shorten sw1,sw2,sw3,sw4,sw5 approx. 15 mm ; (gn/ge approx. 15 mm longer); cut down sw6.

•Attach 2 x approx. 30 mm shrink-fit hose (sticky).

•Strip 10 mm of insulation of ends of wires and secure with crimping sleeve 1.5.

48