Parker Products COMPAX-M /-S (L) manual Hauser linear actuators, Initiator set, 177

HAUSER linear actuators

9.4HAUSER linear actuators

Unit	hardware
Connector	/ cable

Initiator set

The HAUSER "HLEc" linear unit is available with various cross sections:

♦HLE80C cross section: 80 mm x 80 mm up to 6m long

♦HLE100C cross-section: 100 mm x 100 mm up to 7m long

♦HLE150C cross-section: 150 mm x 150 mm up to 10m long

Highly dynamic, modular linear axis "HPLA" with toothed belt drive or rack- and-pinion drive:

♦HPLA80: cross section: 80 mm x 80 mm

up to 50m for rack-and-pinion, up to 20m for toothed belt

♦HPLA120: cross section: 120 mm x 120 mm

up to 50m for rack-and-pinion, up to 20m for toothed belt

♦HPLA180: cross section: 180 mm x 180 mm

up to 50m for rack-and-pinion, up to 20m for toothed belt

Electric cylinder ET: with 50 - 1500 mm stroke. Tensile and shear forces up to 21000 N

Vertical actuators with toothed belt: up to 2500mm stroke; up to 100kg payload

The attached transmissions are available with ratios of 3:1, 5:1, 7:1, 10:1 and 25:1. Please contact us if you require more information.

If you are using, e.g. a rack-and-pinion drive, toothed belt drive or spindle drive, you can obtain the necessary initiators and initiator connectors and cable from us. We can also supply you with retaining material on request.

	assignment
Technical data
Configuration
Positioning and	control functions
Optimization	functions
Interfaces
Accessories /	options
Status
Parameter
list

177

Error