Parker Products COMPAX-M /-S (L) Emergency stop input direct to COMPAX-M, Ready contact max .5A

COMPAX 1000SL Unit characteristics

COMPAX 1000SL X19

25 pin Sub-D	1		Pin	Assignment
socket strip		14	23	+24V DC (<50mA)
screw connection
			1	0V
UNC4-40			24	P: Ready contact
	13	25	25	S: Ready contact
			11	Emergency stop input (activated by 15V – 24V)

Emergency stop input direct to COMPAX-M X9

Connector: Phoenix		Pin	Assignment
MC1.5/7-ST-3.81		1	+24V DC (<50mA)
		2	0V
	1 2	3	reserved
	3	4	reserved
	4 5
		5	+24V DC – Output for emergency stop
	6	6	Emergency stop input (activated by 15V – 24V)
	7
		7	Screen

*Emergency stop input on COMPAX-M

The emergency stop input on COMPAX-M X9 is enabled via parameter P219.

Meaning:

!P219="0": No emergency stop input on COMPAX-M X9

!P219="7": Emergency stop input on COMPAX-M X9 with the following data

!Stop with P10 as relative ramp time (P10 = braking time from 100% speed to 0%).

!The motor is switched off.

!Error message E56 is generated.

!The ready contact drops.

Unit	hardware
Connector	assignment / cable
Technical data
Configuration
Positioning and	control functions

Principle of safety chain and emergency stop function

control		external	power supply			COMPAX-M COMPAX-M
	component			module			No. 1	No. x
				X8/1	+24V
				X8/2
					GND
				X8/3
	readiness			X8/4
				X8/5
emerg. stop				X8/6

X8/7 shield

COMPAX-S X9 i.e. COMPAX 35XXM X19

X./1	+24V
X./2
	GND
X./3
X./4
X./5
X./6
X./7	shield

Ready contact: max. 0.5A,

60V, 30W

Applies to potential - 24V power supply.

Optimization	functions
Interfaces
Accessories /	options
Status
Parameter
list

45

Error