Parker Products COMPAX-M /-S (L) manual Control processes for optimization, Accel

Optimization functions

Optimization parameters

Control processes for optimization

Targets / problems	Stiff-	Damp-	Advance contr.	Acceleration	Ramp	Other
	ness	ing (P24)	factors (P25,	time	shape	measures
	(P23)		P26, P70)	(ACCEL)	(P94)
Minimizing lag error	increase	-	=100%	increase	-	-
			optimize if
			necessary
No harmonies	-	increase	decrease	increase	quadratic	increase max.
					(P94="3")	torque (P16)
Unusually high	decrease	decrease	decrease	increase	linear	increase max.
harmonies caused					(P94="1")	torque (P16)
by power limitation
Vibrating at higher	decrease	decrease	-	-	-	check min. mass
frequencies						(P92) and min.
(perceptible as noise)						moment of inertia
						(P81).
Vibrating at lower	-	increase	-	-	-	check max. mass
frequencies						(P88) and max.
(perceptible as						moment of inertia
motion)						(P82).
High motor or final	decrease	-	-	increase	linear	decrease max.
stage temperatures					(P94="1")	torque (P16)

131

Unit	hardware
Connector	assignment / cable
Technical data
Configuration
Positioning and	control functions
Optimization	functions
Interfaces
Accessories /	options
Status
Parameter
Error list