Parker Products COMPAX-M /-S (L) manual Connections to the motor Additional brake control

Connections to the motor

7.8.2 Additional brake control

Unit	hardware
Connector	/ cable

COMPAX-M / COMPAX 45XXS / COMPAX 85XXS, COMPAX 1000SL

COMPAX controls the motor retaining brake independently (also see Page 123). When running applications which require additional brake control note the following, based on the unit type used.

With these units, you must implement measures for suppression. Note the following application example:

Br.+
contact to external		stop
brake control	33V
		brake
0,47uF		within
	33V	motor
BR.-

assignment

Technical data

COMPAX 25XXS /

COMPAX 35XXM

These protective measures are available in COMPAX-M / COMPAX 45XXS / COMPAX 85XXS for applications without external brake control.

In COMPAX 25XXS (X1/7 and X1/8) and in COMPAX 35XXM (X23: bridge), 2 connections are available for connecting the external contact. These connections are already bridged in the connector when supplied.

External protective measures are not required for COMPAX 25XXS and COMPAX 35XXM.

External contact connection:

The bridge is removed and is replaced by connecting an external contact.

Configuration
Positioning and	control functions
Optimization	functions
Interfaces
Accessories /	options
Status
Parameter
list

51

Error