Parker Products COMPAX-M /-S (L) manual 3 EAM5/01 DC feed for COMPAX-M, Design of EAM5/01

Accessories

EAM5/01: DC feed for COMPAX-M

9.7.3 EAM5/01: DC feed for COMPAX-M

The power supply is normally over a central mains module; NMD10 or NMD20. With the component EAM5/01, available as an accessory, DC voltage can be supplied: the component contains the connections of the mains module.

Input voltage range 100V DC – 650V DC.

The DC intermediate circuit must be limited to 750V in braking mode.

Power voltage is connected directly to COMPAX-M X2

Unit	hardware
Connector	assignment / cable
Technicaldata

C O M P A X -M

COMPAX-M

COMPAX-M
	COMPAX-M
	U	V W PE Brake
		PE + -
	X1
PE	X2
+LS
-LS
24V DC	X3
0V

Configuration
and	functions

EAM5/01 X4

X5X4

Positioning control

Design of EAM5/01:

	X6	X7
		X3
mm	X8
78.0
	F21	X4

X3/3: PE		Supply voltage
		for functions of
X3/2:	24V DC	X8.
X3/1:	0V

Optimization	functions
Interfaces
Accessories /	options

68.0 mm

Note

♦UMK housing from Phoenix

♦to be attached to top hat rail of various sizes

♦without mating connector approx. 4.5 cm deep

Terminal assignment

The component contains the connections of the mains module. EAM5/01 X6 = mains module X6: input bus systems EAM5/01 X7 = mains module X7: output bus systems EAM5/01 X3 = mains module X3: 24V DC supply

189

Status

Parameter

Error list