Parker Products COMPAX-M /-S (L) manual MOK21 max ,9A

Connections to the motor

MOK21 (max. 18,9A)

110 mm 75 mm

MOK21

	30 mm	30 mm	30 mm
	standard/highflex Shrink-fit hose			standard/hochflex
U	black1/black			sw1/sw	U
V	black2/			sw2/br	V
	brown
W	black3/blue			sw3/bl	W
Br. +24V	black4/red			sw4/rt	Br+
Br. -24V	black5/			sw5/gr	Br-
	green

black6 sw6

PE	green-yellow		gn/ge	PE
			CY-JZ 7x2,5
			No. 102-508902
	110 mm		190 mm
35 mm	75 mm
		20 mm	170 mm
15 mm			15 mm
10 mm			10 mm

Version in high-flex: MOK14 (same layout)

MOK11 (max. 32.3A) in high-flex (same layout to MOK21, however in 6 mm2) MOK46 (max. 47.3A) in high-flex (same layout to MOK21, however in 10mm2)

Packaging

Packaging of device

Material:

6 x crimping sleeves.

6 cm shrink-fit hose.

Procedure:

•Strip 110 mm sheathing off cable.

•Cut sheath down to approx. 35 mm, loosen,

•fold back over outer cover (approx. 75 mm) and stick with insulating tape.

•Shorten sw1,sw2,sw3,sw4,sw5 ca. 15 mm (gn/ge approx. 15 mm longer) cut down sw6.

•Attach 2 x approx. 30 mm shrink-fit hose (sticky).

•Strip 10 mm of insulation off ends of wires and secure with crimping sleeves 2.5.

Packaging of motor in accordance with manufacturer's specification

•Strip 190 mm sheathing of cable.

•Cut sheath down to approx. 170 mm, stick remaining 20 mm with insulating tape.

•Shorten sw1,sw2,sw3,sw4,sw5 by approx. 15 mm (gn/ge approx. 15 mm longer) cut down sw6.

•Strip 10 mm of insulation of ends of wires and secure with crimping sleeves 2.5.

49

Unit	hardware
Connector	assignment / cable
Technical data
Configuration
Positioning and	control functions
Optimization	functions
Interfaces
Accessories /	options
Status
Parameter
Error list