Parker Products COMPAX-M /-S (L) manual Diagrams, Data record memory mode, Caption

Operating Instructions	COMPAX-M / -S
Digital inputs and outputs

Idle after stop or break

Mark missing after maximum feed length

In data record memory mode

Caption:

O6

♦O6="1" indicates that the axis is at a standstill due to a STOP (I6) or BREAK (I1&I6).

♦O6 is reset when the axis moves again.

O16

♦Only assigned if mark reference is activated (P35=1).

♦With "0", the mark disappears once the maximum feed length is reached (see Page 100)

8.6.1.8 Diagrams:

I3
Jog-
I5									t
Start
I6									t
Stop
V									t
0
									t
O4
Ready
to Start
O5									t
Progr. target
pos. reached
O6									t
Out of action
after stop
0	1	2	3	4	5	6	7	8	t

0 COMPAX ready for new start.

1 When using START at input I5, the outputs O4 and O5 are reset. The axis moves. 2 Interruption using STOP at input I6. After idle, message at output O6 (3).

4 START using I5. Positioning process is continued.

5 Positioning process ended. Message via O4 and O5="1".

6 Manual processing of axis. O5 and O4 ="0".

7 Specification for manual processing ended. Drive decelerates.

8 Manual process ended. Drive at standstill. Ready message for output O4 is set.

154