Parker Products COMPAX-M /-S (L) manual Motors, EMD motors Linear motor

Accessories and options COMPAX-M / -S

9.3Motors

EMD motors

Linear motor:

Suitable motors are described in the motor catalogue (Article No.: 192- 060011)!

COMPAX also supports the operation of linear motors. For this, COMPAX requires option S3 (interface to linear encoder and Hall sensor; assignment X12 see Page 46).

Conditions regarding the linear motor:

♦3 phase synchronous linear motors with:

•sine-cosine linear encoder (1Vss).or TTL (RS422)

•digital Hall sensor commutation (5V) with following signal sequence:

Phase	Phase	Phase
V-U	U-W	W-V

Hall 1

Hall 2

Hall 3

	The depicted signal sequence applies for positive direction.
Note concerning	Only the modes P212=7 and P212=11 are presently available as reference modes
the reference mode:	for linear motors!
Linear motor LXR	For highly dynamic and precise applications, we provide the linear motor LXR,
	which can be operated with COMPAX 25XXS or COMPAX 10XXSL (with the S3
	option and GBK18 and GBK20 cable). Ask for our leaflet.

Note: When operating the linear motor LXR, reduced norminal and peak currents apply to

COMPAX:

Unit	Nominal		Peak current		Power [kVA]
COMPAX ..	current [Aeff]		[Aeff] <5s
with mains supply: 230V AC
10XXSL	2.1	4.2		0.8
25XXS	4.1	8.2		1.4

176