Parker Products COMPAX-M /-S (L) manual 10 X13 Encoder interfaces, Assignment on

Start-up manual	COMPAX-M / -S
X13: Encoder interfaces, ...
7.9.10 X13: Encoder interfaces, ...

Encoder interfaces for COMPAX

Encoder interfaces for COMPAX 1000SL

The encoder interfaces are available as options for COMPAX (excluding COMPAX 1000SL). 2 channels are present; channel 1 can be equipped as the encoder input and channel 2 as the encoder simulation. The necessary options are described on Page 179.

With COMPAX 1000SL, an encoder interface is integrated in the standard unit. This can be configured either as the encoder input or encoder simulation.

Assignment on X13:

7.9.10.1 Encoder interfaces / analogue rpm specification for COMPAX

(not COMPAX 1000SL)

Connector X13		X13	Designat	Function with encoder input	Function of channel 1 with
		Pin	ion:	or simulation	option I7 for COMPAX
					XX6X or COMPAX XX70
15 pin		1	Housing	Screen terminal:
Sub-D socket		2	N2	Channel 2 zero impulse
terminal strip		3	B2	Channel 2 track B
Screws		4	2A	Channel 2 track A
UNC4-40		5	N1	Channel 1 zero impulse	Enable
		6	B1	Channel 1 track B	+15V (<10mA)
1		7	1A	Channel 1 track A	Input (± 10V)
	9	8	+5V	Output +5V
		9	N2/	Channel 2 zero impuse inverted
		10	B2/	Channel 2 track B inverted
8	15	11	A2/	Channel 2 track A inverted
		12	N1/	Channel 1 zero impuse inverted	Direction of rotation
		13	B1/	Channel 1 track B inverted	-15V (<10mA)
		14	A1/	Channel 1 track A inverted	Input (± 10V)
		15	GND	Reference point

The "Incremental encoder" function is an option for which additional boards are required . If the relevant options are available, the following applies:

Channel 1: encoder input.Channel 2: encoder emulation

We can provide the relevant cables and a bus distributor for wiring up the encoder signals. Use these to implement various applications (see Page 179).

When working with COMPAX XX6X (electronic transmission) and COMPAX XX70 (electronical curve control) variants, you can use option I7 via channel 1 to implement an analogue speed specification (see Page 186).

7.9.10.2 Area of application of process interfaces

	Unit variants
	COMPAX XX00	COMPAX XX30	COMPAX XX60	COMPAX XX70
Encoder emulation	"	"	"	"
Encoder input	! External pos.	! External position	! Master position	! Master position
	localization	localization	(set value)	(set value)
	! SPEED SYNC	(actual value)
Analogue input	! SPEED SYNC	-	! Master speed	! Master speed
Cycle / direction input	! SPEED SYNC	-	! Master position	! Master position
			(set value)

60