Parker Products COMPAX-M /-S (L) Hand-held terminal Functions, Keys Function, Special functions

Accessories

Hand-held terminal

Functions	The hand-held terminal contains the following functions:
	♦	display any status value.
	♦	menu-guided configuration
	♦	view and edit programs.
	♦	view and edit parameters
	♦	direct entry of commands

Key functions The keys are all assigned two functions. Press the SHIFT key to activate the second function of a key. The second function is displayed in turquoise in the lower section of the key.

Keys	Function
NO	Answers a question negatively
YES	Answers a question positively
ESC	Escape
ENT	Confirms and accepts
SHIFT	Selects second function of the key: press once: on; press again: off
DELETE	Deletes program data record, all jumps to addresses are
	automatically corrected
INSERT	Inserts program data record, all jumps to addresses are
	automatically corrected
P	Directly select parameter input
N	Directly select program memory
F3	Quit
Special functions
WAIT Ent	WAIT START
GOTO Ent	GOTO EXT
GOSUB	GOSUB EXT
Ent
SPEED Ent	SPEED SYNC
Special COMPAX XX70 commands
F1	SETC x
F2	SETM x
F3	SETS
F4	LOOP x
POSR Ent	POSR CAM

Lit display		Function
		dark	bright
H1	(red)	No error	Error
H2	(amber)	No warning	Warning: heat sink temperature >70°C
OK (green)		Unit not ready	Unit ready for operation
SH (amber)		First key function	Second key function (SHIFT key pressed)
All		No voltage	Unit not ready for operation

Supply The cable is 1.5 m long. The hand-held terminal is also powered through this cable. If the distances involved are longer (>5m), the hand-held terminal will require a direct power supply for fault-free operation.

Error handling When an error message is present, you can modify the parameter and configuration. To do this, press ESC; the error display goes out and the menu appears. The H1 LED indicates that the error is still present. Once you have modified the parameter, acknowledge the error using F3.

201

Unit	hardware
Connector	assignment / cable
Technical data
Configuration
Positioning and	control functions
Optimization	functions
Interfaces
Accessories /	options
Status
Parameter
Error list