
P-2602H(W)(L)-DxA Series User’s Guide
2When you hear the dial tone, dial “*98#” followed by the number to which you want to transfer the call. to operate the Intercom.
3After you hear the ring signal or the second party answers it, hang up the phone.
11.15.2.4European Three-Way Conference
Use the following steps to make
1When you are on the phone talking to someone, press the flash key to put the caller on hold and get a dial tone.
2Dial a phone number directly to make another call.
3When the second call is answered, press the flash key and press “3” to create a
4Hang up the phone to drop the connection.
5If you want to separate the activated
11.15.3USA Type Supplementary Services
This section describes how to use supplementary phone services with the USA Type Call Service Mode. Commands for supplementary services are listed in the table below.
After pressing the flash key, if you do not issue the
Table 61 USA Flash Key Commands
COMMAND | DESCRIPTION | |
|
|
|
Flash |
| Put a current call on hold to place a second call. After the second |
|
| call is successful, press the flash key again to have a |
|
| conference call. |
|
| Put a current call on hold to answer an incoming call. |
|
|
|
Flash | *98# | Transfer the call to another phone. |
|
|
|
11.15.3.1 USA Call Hold
Call hold allows you to put a call (A) on hold by pressing the flash key.
If you have another call, press the flash key to switch back and forth between caller A and B by putting either one on hold.
If you hang up the phone but a caller is still on hold, there will be a remind ring.
170 | Chapter 11 Voice |