|
|
|
|
|
| Table 60 European Flash Key Commands | |||
|
|
|
| |
| COMMAND | DESCRIPTION | ||
|
|
|
|
|
| Flash | 2 | 1. | Switch back and forth between two calls. |
|
|
| 2. | Put a current call on hold to answer an incoming call. |
|
|
| 3. | Separate the current |
|
|
| individual calls (one is | |
| Flash | 3 | Create | |
|
|
|
| |
| Flash | *98# | Transfer the call to another phone. | |
|
|
|
|
|
11.15.2.1 European Call Hold
Call hold allows you to put a call (A) on hold by pressing the flash key.
If you have another call, press the flash key and then “2” to switch back and forth between caller A and B by putting either one on hold.
Press the flash key and then “0” to disconnect the call presently on hold and keep the current call on line.
Press the flash key and then “1” to disconnect the current call and resume the call on hold.
If you hang up the phone but a caller is still on hold, there will be a remind ring.
11.15.2.2 European Call Waiting
This allows you to place a call on hold while you answer another incoming call on the same telephone (directory) number.
If there is a second call to a telephone number, you will hear a call waiting tone. Take one of the following actions.
•Reject the second call.
Press the flash key and then press “0”.
•Disconnect the first call and answer the second call.
Either press the flash key and press “1”, or just hang up the phone and then answer the phone after it rings.
•Put the first call on hold and answer the second call. Press the flash key and then “2”.
11.15.2.3European Call Transfer
Do the following to transfer an incoming call (that you have answered) to another phone.
1Press the flash key to put the caller on hold.
Chapter 11 Voice | 169 |