P-2602H(W)(L)-DxA Series User’s Guide
The following table describes the labels in this screen.
Table 20 Bandwidth Management Wizard: Service Configuration
LABEL | DESCRIPTION |
|
|
Active | Select Active to enable bandwidth management for service specified traffic. |
| Select an entry’s Active check box to turn on bandwidth management for the service/ |
| application. |
Service | These fields display the services names. |
|
|
Priority | Select High, Mid or Low priority for each service to have your ZyXEL Device use a |
| priority for traffic that matches that service. |
| A service with High priority is given as much bandwidth as it needs. |
| If you select services as having the same priority, then bandwidth is divided equally |
| amongst those services. |
| Services not specified in bandwidth management are allocated bandwidth after all |
| specified services receive their bandwidth requirements. |
| If the rules set up in this wizard are changed in Advanced, Bandwidth MGMT, Rule |
| Setup, then the service priority radio button will be set to User Configured. |
| The Advanced, Bandwidth MGMT, Rule Setup screen allows you to edit these rule |
| configurations. |
Back | Click Back to go back to the previous wizard screen. |
|
|
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Exit | Click Exit to close the wizard screen without saving your changes. |
|
|
5Follow the
Figure 41 Bandwidth Management Wizard: Complete
Chapter 5 Bandwidth Management Wizard | 81 |