P-2602H(W)(L)-DxA Series User’s Guide

Figure 64 Wireless: Static WEP Encryption

The following table describes the wireless LAN security labels in this screen.

Table 38 Wireless: Static WEP Encryption

LABEL

DESCRIPTION

 

 

Security Mode

Choose Static WEP from the drop-down list box.

 

 

Passphrase

Enter a Passphrase (up to 32 printable characters) and clicking Generate. The ZyXEL

 

Device automatically generates a WEP key.

WEP Key

The WEP key is used to encrypt data. Both the ZyXEL Device and the wireless

 

stations must use the same WEP key for data transmission.

 

If you want to manually set the WEP key, enter any 5, 13 or 29 characters (ASCII

 

string) or 10, 26 or 58 hexadecimal characters ("0-9", "A-F") for a 64-bit, 128-bit or

 

256-bit WEP key respectively.

9.5.3 WPA(2)-PSK

In order to configure and enable WPA-PSK authentication; click Network > Wireless LAN to display the General screen. Select WPA-PSKor WPA2-PSKfrom the Security Mode list.

128

Chapter 9 Wireless LAN

Page 128
Image 128
ZyXEL Communications P-2602 manual 3 WPA2-PSK, Wireless LAN