ZyXEL Communications P-2602 manual LAN IP Alias, LAN Client List, LAN Setup 117

P-2602H(W)(L)-DxA Series User’s Guide

The following table describes the labels in this screen.

Table 33 LAN Client List

LABEL	DESCRIPTION
IP Address	Enter the IP address that you want to assign to the computer on your LAN with the
	MAC address that you will also specify.
MAC Address	Enter the MAC address of a computer on your LAN.
Add	Click Add to add a static DHCP entry.
#	This is the index number of the static IP table entry (row).
Status	This field displays whether the client is connected to the ZyXEL Device.
Host Name	This field displays the computer host name.
IP Address	This field displays the IP address relative to the # field listed above.
MAC Address	The MAC (Media Access Control) or Ethernet address on a LAN (Local Area
	Network) is unique to your computer (six pairs of hexadecimal notation).
	A network interface card such as an Ethernet adapter has a hardwired address
	that is assigned at the factory. This address follows an industry standard that
	ensures no other adapter has a similar address.
Reserve	Select the check box in the heading row to automatically select all check boxes or
	select the check box(es) in each entry to have the ZyXEL Device always assign
	the selected entry(ies)’s IP address(es) to the corresponding MAC address(es)
	(and host name(s)). You can select up to 128 entries in this table. After you click
	Apply, the MAC address and IP address also display in the LAN Static DHCP
	screen (where you can edit them).
Modify	Click the modify icon to have the IP address field editable and change it.
Apply	Click Apply to save your changes back to the ZyXEL Device.
Cancel	Click Cancel to begin configuring this screen afresh.
Refresh	Click Refresh to reload the DHCP table.

8.6 LAN IP Alias

IP alias allows you to partition a physical network into different logical networks over the same Ethernet interface. The ZyXEL Device supports three logical LAN interfaces via its single physical Ethernet interface with the ZyXEL Device itself as the gateway for each LAN network.

When you use IP alias, you can also configure firewall rules to control access between the LAN's logical networks (subnets).

Note: Make sure that the subnets of the logical networks do not overlap.

The following figure shows a LAN divided into subnets A, B, and C.

Chapter 8 LAN Setup 117