P-2602H(W)(L)-DxA Series User’s Guide

Figure 134 Static Route Edit

The following table describes the labels in this screen.

Table 95 Static Route Edit

LABEL

DESCRIPTION

 

 

Active

This field allows you to activate/deactivate this static route.

 

 

Route Name

Enter the name of the IP static route. Leave this field blank to delete this static route.

 

 

Destination IP

This parameter specifies the IP network address of the final destination. Routing is

Address

always based on network number. If you need to specify a route to a single host, use

 

a subnet mask of 255.255.255.255 in the subnet mask field to force the network

 

number to be identical to the host ID.

IP Subnet Mask

Enter the IP subnet mask here.

 

 

Gateway IP

Enter the IP address of the gateway. The gateway is a router or switch on the same

Address

network segment as the device's LAN or WAN port. The gateway helps forward

 

packets to their destinations.

Back

Click Back to return to the previous screen without saving.

 

 

Apply

Click Apply to save your changes back to the ZyXEL Device.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

Chapter 18 Static Route

251

Page 251
Image 251
ZyXEL Communications P-2602 manual Static Route Edit, Static Route 251