
P-2602H(W)(L)-DxA Series User’s Guide
25.7 Using FTP or TFTP to Back Up Configuration
This section covers how to use FTP or TFTP to save your device’s configuration file to your computer.
25.7.1 Using the FTP Commands to Back Up Configuration
1Launch the FTP client on your computer.
2Enter “open”, followed by a space and the IP address of your ZyXEL Device.
3Press [ENTER] when prompted for a username.
4Enter your password as requested (the default is “1234”).
5Enter “bin” to set transfer mode to binary.
6Use “get” to transfer files from the ZyXEL Device to the computer, for example, “get
7Enter “quit” to exit the ftp prompt.
25.7.2FTP Command Configuration Backup Example
This figure gives an example of using FTP commands from the DOS command prompt to save your device’s configuration onto your computer.
Figure 180 FTP Session Example
331 Enter PASS command Password:
230 Logged in ftp> bin
200 Type I OK
ftp> get
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec. ftp> quit
308 | Chapter 25 Tools |