P-2602H(W)(L)-DxA Series User’s Guide

CH A P T E R 4

VoIP Wizard And Example

This chapter shows you how to configure your SIP account(s) and make a VoIP phone call.

4.1 Introduction

The ZyXEL Device has Voice over IP (VoIP) communication capabilities that allow you to use a traditional analog telephone to make Internet calls. You can configure the ZyXEL Device to use up to two SIP based VoIP accounts.

This section describes how you can set up your ZyXEL Device to call someone who is also using a VoIP device. Make sure your telephone is connected to the Phone 1 port before you start with our example.

In the following figure, A represents your phone and B represents the phone of the person you would like to call.

Figure 30 VoIP Phone Calls

In order to make VoIP calls you need to register at least one SIP account on your ZyXEL Device. You can register your SIP account in the VOICE OVER INTERNET SETUP wizard.

4.2VoIP Wizard Setup

1After you enter the password to access the web configurator, select Go to Wizard setup and click Apply. Otherwise, click the wizard icon ( ) in the top right corner of the web configurator to display the wizard main screen.

Chapter 4 VoIP Wizard And Example

71

Page 71
Image 71
ZyXEL Communications P-2602 manual VoIP Wizard And Example, VoIP Wizard Setup