ZyXEL Communications P-2602 manual FSM Logs Caller Side, FSM Logs Callee Side, Pstn Logs

P-2602H(W)(L)-DxA Series User’s Guide

Table 168 RTP Logs

LOG MESSAGE	DESCRIPTION
Error, RTP init fail	The initialization of an RTP session failed.
Error, Call fail: RTP	A VoIP phone call failed because the RTP session could not be
connect fail	established.
Error, RTP connection	The termination of an RTP session failed.
cannot close

Table 169 FSM Logs: Caller Side

LOG MESSAGE	DESCRIPTION
VoIP Call Start Ph[Phone	Someone used a phone connected to the listed phone port to
Port Number] <- Outgoing	initiate a VoIP call to the listed destination.
Call Number
VoIP Call Established	Someone used a phone connected to the listed phone port to
Ph[Phone Port] -> Outgoing	make a VoIP call to the listed destination.
Call Number
VoIP Call End Phone[Phone	A VoIP phone call made from a phone connected to the listed
Port]	phone port has terminated.

Table 170 FSM Logs: Callee Side

LOG MESSAGE	DESCRIPTION
VoIP Call Start from	A VoIP phone call came to the ZyXEL Device from the listed SIP
SIP[SIP Port Number]	number.
VoIP Call Established	A VoIP phone call was set up from the listed SIP number to the
Ph[Phone Port] <- Outgoing	ZyXEL Device.
Call Number
VoIP Call End Phone[Phone	A VoIP phone call that came into the ZyXEL Device has
Port]	terminated.

Table 171		PSTN Logs
LOG MESSAGE			DESCRIPTION
PSTN Call		Start	A PSTN call has been initiated.
PSTN	Call	End	A PSTN call has terminated.
PSTN	Call	Established	A PSTN call has been set up.

Appendix I Log Descriptions 389