P-2602H(W)(L)-DxA Series User’s Guide

SIP provider gave it to you. Leave the defaults in any fields for which you were not given information.

Figure 16 Internet Access Wizard Setup: ISP Parameters

The following table describes the fields in this screen.

Table 7 Internet Access Wizard Setup: ISP Parameters

LABEL

DESCRIPTION

 

 

Mode

From the Mode drop-down list box, select Routing (default) if your ISP allows

 

multiple computers to share an Internet account. Otherwise select Bridge.

Encapsulation

Select the encapsulation type your ISP uses from the Encapsulation drop-down list

 

box. Choices vary depending on what you select in the Mode field.

 

If you select Bridge in the Mode field, select either PPPoA or RFC 1483.

 

If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET ENCAP or

 

PPPoE.

Multiplexing

Select the multiplexing method used by your ISP from the Multiplex drop-down list

 

box either VC-based or LLC-based.

Virtual Circuit

VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define a virtual circuit.

ID

Refer to the appendix for more information.

VPI

Enter the VPI assigned to you. This field may already be configured.

 

 

VCI

Enter the VCI assigned to you. This field may already be configured.

 

 

Back

Click Back to go back to the previous screen.

 

 

60

Chapter 3 Internet and Wireless Setup Wizard

Page 60
Image 60
ZyXEL Communications P-2602 manual Label Description, PPPoE, Vpi, Vci