:ANAPURNA XL² | OPERATOR MANUAL |
10. Head Base – Height Control.
10.1.Automatic“HeadBaseHeight”Setup
Thisisdoneinthe“HeadGapControl”,whichcanbef oundintheSetupParameter window.
CheckorchangethefollowingParameterstosettheHea dBaseHeight:
Gap:
Enterthevaluethatyouwantthe“HeadBase”tobe abovethemediasurface. (Recommendedvalue:1.5mm;Forheatsensitivemedia, youcangohigherto avoidthattoomuchheatisacceptedbythemedia,and asaresultthemedia isextendedandcantouchtheheadorisprintedwith badquality.
Changeofthisvaluerequireshoweverothervaluesas ‘offset’and‘bi alignmentoffsetparameters.
Don’tforgettosavetheSetupparameterlisttokeept hechange.
AB]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]34] | 8/08/2008] |
