Weed Eater 545186834, MX550 Seasonal Storage, Fuel System, Engine, Other, Porting

Page 11

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool before storing or trans-

porting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time: S Clean the entire unit before lengthy

storage.

SStore in a clean dry area.

SLightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Fol- low the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

HELPFUL TIP

During storage of your gas/ oil mixture, the oil will sepa- rate from the gas.

We recommend that you shake the gas can weekly to insure proper blending of the gas and oil.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to

another.

SReplace your gasoline can if it starts to rust.

11

Image 11
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Operator Safety Safety RulesTransporting and Storage Unit / Maintenance SafetyFuel Safety Cutting SafetyAttaching Shield AssemblyAdjusting the Handle OperationPrimer Bulb Stop SwitchHOW to Stop Your Unit HOW to Start Your UnitTrimmer Line Advance Starting a Warm EngineStarting a Flooded Engine Operating PositionInches 8 cm above ground Cutting MethodsTip of line does Cutting Work areaMaintenance Replacing the Cutting Head Service and AdjustmentsCarburetor Idle Speed Adjustment Replacing the LineOther Seasonal StorageFuel System EngineTroubleshooting Table Cause Remedy Canada, contact Limited WarrantyIntermediate 125 hours Extended 300 hours

545186834, MX550 specifications

The Weed Eater MX550, model number 545186834, is a powerful and efficient string trimmer designed for both residential and light commercial use. This reliable tool is engineered to provide excellent cutting performance, ease of use, and versatility, catering to various lawn care needs.

One of the standout features of the MX550 is its robust 25cc two-cycle engine. This powerful engine ensures optimal performance, allowing users to tackle tough grass, weeds, and overgrown areas with ease. The engine delivers impressive power while remaining lightweight, which minimizes operator fatigue during extended use.

The MX550 is equipped with a 16-inch cutting swath that efficiently covers large areas in a short amount of time, making it ideal for homeowners or landscapers with sizable properties. This wider cutting path allows users to reduce the time spent trimming, thereby increasing productivity. The tool is compatible with both regular trimmer line and heavy-duty line, catering to different cutting scenarios based on user preference.

Innovative technology is featured in the MX550 with its easy-to-load, bump-feed head. This design simplifies line replacement, allowing users to quickly and efficiently reload the trimmer line without the frustration often associated with traditional systems. The bump-feed function eliminates downtime, ensuring that the trimmer is always ready for action.

Moreover, the Weed Eater MX550 comes with adjustable handlebars, providing a comfortable grip for users of all heights. This ergonomic feature enhances control and maneuverability, making it easier to work in tight spaces or navigate around obstacles such as trees and flower beds.

This model also prioritizes user safety and convenience. It features a clear debris shield that protects the operator from debris while providing a clear view of the cutting area. The trimmer’s balanced design and lightweight frame reduce strain on the user, making it an ideal choice for extended periods of operation.

Additionally, the MX550 is designed for easy maintenance, with accessible components that allow for straightforward cleaning and servicing. This ensures the longevity of the trimmer, keeping it in peak operating condition for years to come.

In summary, the Weed Eater MX550, 545186834, combines power, versatility, and user-oriented design features to create an effective string trimmer for a range of trimming tasks. Whether you are a homeowner looking to maintain your lawn or a professional landscaper seeking reliable equipment, the MX550 stands out as a dependable choice in the vast market of outdoor power tools.