Weed Eater 545186794, FL20C Shaft Assembly, Adjusting the Handle, Attaching Shield

Page 5

ASSEMBLY

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723. It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

SHAFT ASSEMBLY

CAUTION: When assembling shaft, place the unit on a flat surface for stability.

1.Align grooves on upper and lower shafts.

Upper Shaft

Grooves

Lower Shaft

2.Push the two shafts together until the lower shaft is fully seated in the upper shaft (the shafts lock into place).

NOTE: If locking sleeve assembly will not tighten, the shafts are not fully seated.

ADJUSTING THE HANDLE

WARNING: When adjusting the assist handle, be sure it remains above the safety label and below the mark or arrow on the shaft.

1.Loosen wing nut on handle.

2.Rotate the handle on the shaft to an upright position; retighten wing nut.

ATTACHING SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you.

For proper orientation of shield, see KNOW YOUR TRIMMER illustration in OPERATION section.

1.Remove wing nut from shield.

2.Insert bracket into slot as shown.

3.Pivot shield until bolt passes through hole in bracket.

4.Securely tighten wing nut onto bolt.

Shield

Bracket

Slot

3.Slide lower locking sleeve assembly over upper locking sleeve assembly and tight- en by turning clockwise.

Upper Locking

Sleeve Assembly

Lower Locking

Sleeve Assembly

Wing Nut

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Operator Safety Safety RulesFuel Safety Unit / Maintenance SafetyCutting Safety Transporting and StorageShaft Assembly AssemblyAdjusting the Handle Attaching ShieldOperation HOW to Start Your Unit HOW to Stop Your UnitFuel Requirements Starting a Warm EngineOperating Position Starting a Flooded EngineTrimmer Line Advance Cutting MethodsInspect and Clean Unit and Labels MaintenanceClean AIR Filter Check for Loose Fasteners and PartsService and Adjustments Fuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Canada, contact Limited WarrantyIntermediate 125 hours Extended 300 hours

545186794, FL20C specifications

The Weed Eater 545186794, FL20C is a powerful and versatile string trimmer that is ideal for both homeowners and professional landscapers. With its ergonomic design and advanced technologies, this string trimmer makes yard maintenance easier and more efficient.

One of the standout features of the FL20C is its lightweight construction. Weighing in at only 8.5 pounds, it is easy to maneuver, reducing fatigue during extended use. This makes it an excellent choice for users of all ages and skill levels. The adjustable handle also provides added comfort and control, allowing users to customize the grip to suit their preference.

The FL20C is powered by a robust 20cc two-stroke engine that delivers impressive performance. This engine offers plenty of power for tackling thick grass and weeds, while still being fuel-efficient. The trimmer's speed and performance make it suitable for various outdoor tasks, from trimming around flower beds to edging along driveways and sidewalks.

One of the notable technologies incorporated into the Weed Eater FL20C is its easy-start system. The trimmer's design includes a primer bulb and a choke for quick and effortless starting. This feature is especially beneficial for those who may struggle with traditional string trimmers that require multiple pulls to start.

Additionally, the FL20C uses a bump feed line advance system. This means that when users tap the trimmer head on the ground, it automatically releases more line, ensuring that the user always has an optimal cutting length without having to stop and manually feed the line. This significantly enhances productivity and convenience.

Durability is another key characteristic of the Weed Eater FL20C. Constructed with high-quality materials, it is built to withstand the rigors of regular use. The trimmer head is designed for easy line replacement, minimizing downtime.

For those concerned about safety, the FL20C features a protective guard to shield users from debris while trimming. This added safety measure provides peace of mind during operation.

In summary, the Weed Eater 545186794, FL20C is a standout choice for anyone looking to maintain their yard effectively. With its lightweight design, powerful engine, easy-start technology, bump feed system, and focus on durability and safety, this string trimmer offers exceptional performance for a variety of trimming tasks. Whether for occasional backyard upkeep or regular landscaping work, the FL20C delivers results with ease and efficiency.
Top Page Image Contents