CABINET ASSEMBLY

CABINET PANELS

There are five panels that comprise the cabinet assembly. The ends of the cabinet allow access to all controls and plumbing. Please confirm all joints are attached correctly and sealed to prevent water leakage inside the cabinet, see Figure 26.

FLAME SENSOR

The flame sensor is used to sense the burner flame. When there is sufficient flame, and the burner is properly grounded, the flame sensor signals back to the ignition board that the burner is operating properly and to maintain the operation of the gas valve until the thermostat is satisfied.

FIGURE 26

ADDITIONAL CONTROLS

GAS VALVE

The gas valve is used to supply the gas to the unit during heat up periods. The ignition control board monitors the thermostat's call for heat and sends a signal to the gas valve when to open to allow gas flow, see Figure 27.

FIGURE 28

INSTALLATION INSTRUCTIONS

REQUIRED ABILITY

INSTALLATION OR SERVICE OFTHIS WATER HEATER REQUIRES ABILITY EQUIVALENT TO THAT OF A LICENSED TRADESMAN IN THE FIELD INVOLVED. PLUMBING, AIR SUPPLY, VENTING, GAS SUPPLY AND ELECTRICAL WORK ARE REQUIRED.

INSULATION BLANKETS

Insulation blankets available to the general public for external use on gas water heaters are not approved for use on your State water heater. The purpose of an insulation blanket is to reduce the standby heat loss encountered with storage tank water heaters. Your State water heater meets or exceeds the ASHRAE/IES 90.1b 1999 standards with respect to insulation and standby loss requirements, making an insulation blanket unnecessary.

 

LOCATING THE HEATER

 

WARNING

 

THERE IS A RISK IN USING FUEL BURNING APPLIANCES SUCH

 

AS GAS WATER HEATERS IN ROOMS, GARAGES OR OTHER

 

AREAS WHERE GASOLINE, OTHER FLAMMABLE LIQUIDS OR

 

ENGINE DRIVEN EQUIPMENT OR VEHICLES ARE STORED,

 

OPERATED OR REPAIRED. FLAMMABLE VAPORSARE HEAVYAND

 

TRAVEL ALONG THE FLOOR AND MAY BE IGNITED BY THE

 

HEATER’S IGNITER OR MAIN BURNER FLAMES CAUSING FIRE

 

OR EXPLOSION. SOME LOCAL CODES PERMIT OPERATION OF

 

GAS APPLIANCES IF INSTALLED 18 INCHES (46 cm) OR MORE

 

ABOVE THE FLOOR. THIS MAY REDUCE THE RISK IF LOCATION

 

IN SUCH AN AREA CANNOT BE AVOIDED.

 

THE HEATER SHALL BE LOCATED OR PROTECTED SO IT IS

 

NOT SUBJECT TO PHYSICAL DAMAGE BY A MOVING VEHICLE.

 

DO NOT LOCATE THE HEATER WHERE NOISE FROM THE

 

EXHAUST OR INTAKE WILL BE OBJECTIONABLE. THIS

 

INCLUDES LOCATIONS CLOSE TO ORACROSS FROM WINDOWS

FIGURE 27

AND DOORS.

11

Page 10 Page 12
Page 11
Image 11
State Industries SRT80 120NE warranty Installation Instructions, Cabinet Assembly, Additional Controls
Page 10 Page 12

SRT80 120NE specifications

The State Industries SRT80 120NE is a high-efficiency water heater designed for both residential and commercial applications. It stands out in the market due to its advanced features and reliable performance, making it an excellent choice for users seeking durability, efficiency, and convenience.

One of the key features of the SRT80 120NE is its robust tank construction. It is built with a strong glass-lined steel tank to enhance durability while reducing the likelihood of corrosion over time. The insulation surrounding the tank minimizes heat loss, ensuring that the water remains hot for longer periods, ultimately leading to energy savings.

The SRT80 120NE utilizes a state-of-the-art heating element system, which offers rapid recovery rates. This means that you can enjoy a continuous supply of hot water, even during peak usage times. The heating elements are also designed for easy replacement, providing a cost-effective solution for maintenance.

Another noteworthy feature is the advanced control system that allows for precise temperature adjustments. This ensures that users can select their desired water temperature with ease, enhancing comfort and convenience. Additionally, the built-in safety features such as a temperature and pressure relief valve help to prevent potential hazards, ensuring user safety.

In terms of energy efficiency, the State Industries SRT80 120NE boasts impressive energy factor ratings. This translates to lower energy bills and a reduced environmental footprint, making it an eco-friendly option for users. Additionally, the unit meets or exceeds various energy efficiency standards, underscoring its commitment to sustainability.

The SRT80 120NE also incorporates innovative technologies such as electronic controls and diagnostics, which facilitate easier troubleshooting and repair. This ensures that any issues can be addressed quickly, reducing downtime and providing peace of mind.

Moreover, the compact design of the SRT80 120NE makes it suitable for installation in various locations, even where space is at a premium. With a variety of connections and compatibility with numerous plumbing setups, installation becomes straightforward, allowing for flexibility in use.

In summary, the State Industries SRT80 120NE combines robust construction, advanced heating technology, and superior efficiency, making it an ideal choice for those needing reliable hot water solutions. Whether for residential or commercial use, this water heater stands out for its performance and convenience.
Top Page Image Contents