Manuals / State Industries / Household Appliance / Water Heater

State Industries SRT80 120NE warranty Provide Unit Support, Roof Curb

Models: SRT80 120NE

1 36
Download 36 pages 7.36 Kb
Page 12
Image 12

FIGURE29

WARNING

FLAMMABLE ITEMS, PRESSURIZED CONTAINERS OR ANY OTHER POTENTIAL FIRE HAZARDOUS ARTICLES MUST NEVER BE PLACED ON OR ADJACENT TO THE HEATER. OPEN CONTAINERS OF FLAMMABLE MATERIAL SHOULD NOT BE STORED OR USED IN THE SAME ROOM WITH THE HEATER.

Water heater life depends upon water quality, water pressure and the environment in which the water heater is installed. Water heaters are sometimes installed in locations where leakage may result in property damage, even with the use of a drain pan piped to a drain. However, unanticipated damage can be reduced or prevented by a leak detector or water shutoff device used in conjunction with a piped drain pan. These devices are available from some plumbing supply wholesalers and retailers, and detect and react to leakage in various ways:

•Sensors mounted in the drain pan that trigger an alarm or turn off the incoming water to the water heater when leakage is detected.

•Sensors mounted in the drain pan that turn off the water supply to the entire home when water is detected in the drain pan.

•Water supply shutoff devices that activate based on the water pressure differential between the cold water and hot water pipes connected to the water heater.

•Devices that will turn off the gas supply to a gas water heater while at the same time shutting off its water supply.

PROVIDE UNIT SUPPORT

Before locating the unit on the roof, make sure the strength of the roof and beams are adequate at that point to support the weight of

the unit full of water. (Full weight of approximately 1300 lbs. Add extra load and safety factors.) This is very important and the user's responsibility, see Figure 29. If you are uncertain as to the load bearing capability of the roof, consult a licensed structural engineering expert.

The unit should be placed on a solid level roof curb of adequate strength. A properly designed roof curb is provided through State Order Entry.

IMPORTANT: THE WATER HEATER SHOULD BE EMPTY OF WATER DURING LIFTING. MAKE SUREALLFASTENERS ON THE BASE OF THE UNIT ARE IN PLACE DURING LIFTING.

The location of the unit on the roof should be such that exhaust gas is not located near any air intakes or ventilation ducts.

Provide a minimum of 36" on each side of the unit for servicing.

Plumbing connections for water are made from inside the building. Gas and electric connections are made from the rooftop. Remote control wiring passes through the leak-tight fitting in the base of the unit.

ROOF CURB

Assemble and install accessory roof curb in accordance with instructions shipped with curb.

IMPORTANT: THE GASKETING OF THE UNIT TO THE ROOF CURB IS CRITICAL FOR A WATER TIGHT SEAL. INSTALL GASKET SUPPLIED WITH THE ROOF CURB AS SHOWN IN FIGURE 30.

Curb should be level. Refer to Accessory Roof Curb Installation Instructions for additional information as required.

12

Page 11 Page 13
Page 12
Image 12
State Industries SRT80 120NE warranty Provide Unit Support, Roof Curb
Page 11 Page 13

SRT80 120NE specifications

The State Industries SRT80 120NE is a high-efficiency water heater designed for both residential and commercial applications. It stands out in the market due to its advanced features and reliable performance, making it an excellent choice for users seeking durability, efficiency, and convenience.

One of the key features of the SRT80 120NE is its robust tank construction. It is built with a strong glass-lined steel tank to enhance durability while reducing the likelihood of corrosion over time. The insulation surrounding the tank minimizes heat loss, ensuring that the water remains hot for longer periods, ultimately leading to energy savings.

The SRT80 120NE utilizes a state-of-the-art heating element system, which offers rapid recovery rates. This means that you can enjoy a continuous supply of hot water, even during peak usage times. The heating elements are also designed for easy replacement, providing a cost-effective solution for maintenance.

Another noteworthy feature is the advanced control system that allows for precise temperature adjustments. This ensures that users can select their desired water temperature with ease, enhancing comfort and convenience. Additionally, the built-in safety features such as a temperature and pressure relief valve help to prevent potential hazards, ensuring user safety.

In terms of energy efficiency, the State Industries SRT80 120NE boasts impressive energy factor ratings. This translates to lower energy bills and a reduced environmental footprint, making it an eco-friendly option for users. Additionally, the unit meets or exceeds various energy efficiency standards, underscoring its commitment to sustainability.

The SRT80 120NE also incorporates innovative technologies such as electronic controls and diagnostics, which facilitate easier troubleshooting and repair. This ensures that any issues can be addressed quickly, reducing downtime and providing peace of mind.

Moreover, the compact design of the SRT80 120NE makes it suitable for installation in various locations, even where space is at a premium. With a variety of connections and compatibility with numerous plumbing setups, installation becomes straightforward, allowing for flexibility in use.

In summary, the State Industries SRT80 120NE combines robust construction, advanced heating technology, and superior efficiency, making it an ideal choice for those needing reliable hot water solutions. Whether for residential or commercial use, this water heater stands out for its performance and convenience.