Weed Eater 545186794, FL20C Maintenance, Check for Loose Fasteners and Parts, Clean AIR Filter

Page 9

Trimming

3 inches (8 cm) above ground

SCALPING -- The scalping technique re- moves unwanted vegetationdown to the ground. Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique increases line wear.

Scalping

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot

reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

MAINTENANCE

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, WEED EATER may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screws S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SSTOP Switch -- Ensure STOP switch func- tions properly by pushing and holding the switch in the STOP position. Make sure en- gine stops. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the air filter cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is opened.

2.Open air filter cover by pushing button

(see illustration). Remove air filter. NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Replace air filter and close cover.

Button

Air Filter

Air Filter Cover

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Operator Safety Safety RulesFuel Safety Unit / Maintenance SafetyCutting Safety Transporting and StorageShaft Assembly AssemblyAdjusting the Handle Attaching ShieldOperation HOW to Start Your Unit HOW to Stop Your UnitFuel Requirements Starting a Warm EngineOperating Position Starting a Flooded EngineTrimmer Line Advance Cutting MethodsInspect and Clean Unit and Labels MaintenanceClean AIR Filter Check for Loose Fasteners and PartsService and Adjustments Fuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Canada, contact Limited WarrantyIntermediate 125 hours Extended 300 hours

545186794, FL20C specifications

The Weed Eater 545186794, FL20C is a powerful and versatile string trimmer that is ideal for both homeowners and professional landscapers. With its ergonomic design and advanced technologies, this string trimmer makes yard maintenance easier and more efficient.

One of the standout features of the FL20C is its lightweight construction. Weighing in at only 8.5 pounds, it is easy to maneuver, reducing fatigue during extended use. This makes it an excellent choice for users of all ages and skill levels. The adjustable handle also provides added comfort and control, allowing users to customize the grip to suit their preference.

The FL20C is powered by a robust 20cc two-stroke engine that delivers impressive performance. This engine offers plenty of power for tackling thick grass and weeds, while still being fuel-efficient. The trimmer's speed and performance make it suitable for various outdoor tasks, from trimming around flower beds to edging along driveways and sidewalks.

One of the notable technologies incorporated into the Weed Eater FL20C is its easy-start system. The trimmer's design includes a primer bulb and a choke for quick and effortless starting. This feature is especially beneficial for those who may struggle with traditional string trimmers that require multiple pulls to start.

Additionally, the FL20C uses a bump feed line advance system. This means that when users tap the trimmer head on the ground, it automatically releases more line, ensuring that the user always has an optimal cutting length without having to stop and manually feed the line. This significantly enhances productivity and convenience.

Durability is another key characteristic of the Weed Eater FL20C. Constructed with high-quality materials, it is built to withstand the rigors of regular use. The trimmer head is designed for easy line replacement, minimizing downtime.

For those concerned about safety, the FL20C features a protective guard to shield users from debris while trimming. This added safety measure provides peace of mind during operation.

In summary, the Weed Eater 545186794, FL20C is a standout choice for anyone looking to maintain their yard effectively. With its lightweight design, powerful engine, easy-start technology, bump feed system, and focus on durability and safety, this string trimmer offers exceptional performance for a variety of trimming tasks. Whether for occasional backyard upkeep or regular landscaping work, the FL20C delivers results with ease and efficiency.
Top Page Image Contents