Pelco EH3515, EH3512 Operation, Maintenance, Specifications, Pelco Manual C478M-L11/03

OPERATION

If your enclosure has a thermostatically controlled heater, the thermostat is set to turn on at 50°F (10°C) and to turn off at 80°F (27°C).

If your enclosure has a blower and/or defroster, they operate continuously.

MAINTENANCE

Regularly scheduled maintenance prolongs the operational life and appearance of the equipment. Clean the window regularly with a soft cloth using a mild, nonabrasive detergent and water to maintain picture clarity.

SERVICE MANUAL

If you need to repair the camera enclosure, obtain a service manual in one of the following ways:

•Go to Pelco’s web site at ftp://www.pelco.com and find service manual C478SM.

•Call Pelco’s DataFax service at 1-800-289-9108 or 1-559-292-0435 and request docu- ment number 24788.

•Contact Pelco’s Literature Department and request service manual C478SM.

SPECIFICATIONS

Camera Mounting:	Multiple holes on adjustable camera sled; camera sled mounts in
	threaded strip for easier removal and can be inverted for additional
	camera elevation.
Camera and
Lens Size	Accommodates camera and lens combinations (including BNC con-
	nector) up to 2.87 in. W x 3.00 in. H (7.28 x 7.62 cm) and the follow-
	ing lengths:
	EH3508:	6.80 in. (17.27 cm)
	EH3508-1/-2/-3:	5.00 in. (12.70 cm)
	EH3512:	10.25 in. (26.03 cm)
	EH3512-1/-2/-3:	9.00 in. (22.86 cm)
	EH3512-1HD/-2HD/-3HD:	10.00 in. (25.40 cm)
	EH3515:	13.25 in. (33.66 cm)
	EH3515-1/-2/-3:	12.00 in. (30.48 cm)
	EH3515-1HD/-2HD/-3HD:	13.00 in. (33.02 cm)
Viewing Window:	Lexan® , .187-inch (4.75 mm) thick, optically clear, impact-resistant,
	MR5 coated (U.L. 94HB rated).
Viewing Area
EH3508/EH3512/
EH3515:	2.25 in. H x 2.63 in. W (5.71 x 6.68 cm)
All other models:	2.00-inch (5.08 cm) diameter circle
Cable Entry:	Two PG13.5 compression glands on bottom at rear of enclosure;
	maximum cable diameter 0.47-inch (1.19 cm).
Cable Entry Holes:	0.875-inch diameter; will accept 0.50-inch (1.27 cm) conduit fitting
	when compression gland is removed.
Latch:	Link-lock No. 3, stainless steel, can be secured with padlock (not
	supplied).
GENERAL
Construction:	Extruded and die-cast aluminum body
Dimensions:	Refer to Figure 4
Environment:	-10°to 120°F (-23°to 49°C)
Weight	EH3508:	2.67 lb (1.21 kg)
	EH3508-1/-2/-3:	2.76 lb (1.25 kg)
	EH3512:	3.40 lb (1.58 kg)
	EH3512-1/-2/-3/-1HD/-2HD/-3HD: 3.85 lb (1.75 kg)
	EH3515:	4.10 lb (1.86 kg)
	EH3515-1/-2/-3/-1HD/-2HD/-3HD: 4.47 lb (2.03 kg)

(Design and product specifications subject to change without notice.)

Pelco Manual C478M-L (11/03) 7