Service and Adjustments, Line Replacement

SERVICE AND ADJUSTMENTS

LINE REPLACEMENT

1.Remove spool by firmly pulling on tap button.

2.Clean entire surface of hub and spool.

3.Replace with a pre-wound spool, or cut two lengths of 12-1/2 feet of 0.080″ (2 mm) di- ameter WEED EATER brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert ends of the lines about 1/2 inch (1 cm) into the small holes on the inside of spool.

Spool

Small

Holes

Line exit holes

Line in Notch

Hub

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrows found on the spool.

6.Push the lines into the notches, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the lines into the the exit holes in the hub as shown in the illustration.

8.Align the notches with the line exit holes.

9.Push spool into hub until it snaps into place.

10.Pull the lines extending outside of the hub to release the lines from the notches.

REPLACING THE TRIMMER HEAD

1.Hold the dust cup with a wrench to keep the shaft from turning while removing and installing trimmer head.

Dust Cup

2.Remove trimmer head by turning counter- clockwise (looking from bottom of unit).

3.Thread replacement trimmer head onto the shaft by turning clockwise. Only tighten hand tight!

CARBURETOR IDLE SPEED ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The trimmer head will be spinning during this procedure. Wear your protective equipment and observe all safety precautions.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is re- leased.

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

To adjust idle speed:

Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow).

S Turn idle speed screw clockwise to in- crease engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed.

Idle Speed Screw

Air Filter Cover

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723.

545186835, 952711829 specifications

The Weed Eater 952711829,545186835 is a high-performance string trimmer designed for both residential and professional landscaping tasks. This versatile and powerful tool incorporates several innovative features and technologies that set it apart in the market, allowing users to achieve exceptional results with ease.

One of the main characteristics of the Weed Eater 952711829,545186835 is its lightweight design, making it easy to maneuver around various types of terrain while reducing fatigue during extended use. Weighing in at a manageable level, this trimmer allows users to comfortably work for longer periods without the strain typically associated with heavier models.

Equipped with a robust and efficient engine, this trimmer delivers reliable power for cutting through tough grass and weeds. The engine is designed with fuel efficiency in mind, ensuring that users can complete their tasks without frequent interruptions for refueling. This aspect is particularly beneficial for those large projects or when tackling extensive areas of overgrown vegetation.

The Weed Eater 952711829,545186835 features an automatic line feed system, allowing for seamless operation. As the user works, the trimmer automatically feeds out more line when needed, eliminating the hassle of manually feeding the line or stopping to make adjustments. This technology enhances productivity, enabling users to focus on their trimming tasks without unnecessary downtime.

Another standout feature is the adjustable handle, which can be tailored to the user’s height and preference. This customization promotes ergonomic use, allowing operators to maintain a comfortable posture while trimming at various angles. A comfortable grip not only enhances control but also contributes to more precise cutting, resulting in a cleaner finish.

The trimmer’s cutting width is optimized for efficiency, enabling users to cover more ground in less time. This characteristic is essential for both residential gardening and professional landscaping applications, where time is often of the essence.

The Weed Eater 952711829,545186835 also incorporates durability features, ensuring longevity and reliability. The construction materials are designed to withstand the rigors of regular use, and the overall maintenance requirements are minimal, allowing users to enjoy the trimmer's performance for years to come with proper care.

In summary, the Weed Eater 952711829,545186835 is a well-rounded string trimmer that combines power, efficiency, and user-friendly features. Its lightweight design, automatic line feed, adjustable handle, and robust cutting capabilities make it an excellent choice for those seeking a reliable tool for their landscaping needs. Whether for home use or professional applications, this trimmer stands out as a top contender in the market.