Weed Eater 545137264, FX26S Safety Rules, Operator Safety, Unit / Maintenance Safety, Fuel Safety

Page 2

SAFETY RULES

WARNING: When using gardening appliances, basic safety precautions must al- ways be followed to reduce the risk of fire and serious injury. Read and follow all instruc- tions.

This power unit can be dangerous! Operator is responsible for following instructions and warn- ings on unit and in manual. Read entire instruc- tion manual before using unit! Be thoroughly fa- miliar with the controls and the proper use of the unit. Restrict the use of this unit to persons who have read, understand, and will follow the instructions and warnings on the unit and in the manual. Never allow children to operate this unit.

INSTRUCTION

SAFETY INFORMATION

MANUAL

ON THE UNIT

DANGER: Never use blades or flailing devices. This unit is designed for line trimmer use only. Use of any other accessories or at- tachments will increase the risk of injury.

WARNING: Trimmer line throws ob- jects violently. You and others can be blinded/in- jured. Wear eye and leg protection. Keep body parts clear of rotating line.

Eye Protection

 

HazardZone

 

50 ft.

Boots

(15 m)

 

Keep children, bystanders, and animals 50 feet (15 meters) away. If approached stop unit im- mediately.

If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, contact your authorized service dealer or call 1-800-554--6723.

OPERATOR SAFETY

SDress properly. Always wear safety glasses or similar eye protection when operating, or performing maintenance, on your unit (safety glasses are available). Eye protection should

be marked Z87.

SAlways wear face or dust mask if operation is dusty.

SAlways wear heavy, long pants, long sleeves, boots, and gloves. Wearing safety leg guards is recommended.

SAlways wear foot protection. Do not go bare- foot or wear sandals. Stay clear of spinning

line.

SSecure hair above shoulder length. Secure or remove loose clothing or clothing with loosely hanging ties, straps, tassels, etc. They can be caught in moving parts.

S Being fully covered also helps protect you from debris and pieces of toxic plants thrown by spinning line.

SStay Alert. Do not operate this unit when you are tired, ill, upset or under the influence of al- cohol, drugs, or medication. Watch what you

are doing; use common sense.

SWear hearing protection.

S Never start or run inside a closed room or building. Breathing exhaust fumes can kill.

SKeep handles free of oil and fuel.

UNIT / MAINTENANCE SAFETY

S Disconnect the spark plug before performing maintenance except carburetor adjustments.

S Look for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep in good working condition.

S Replace trimmer head parts that are chipped, cracked, broken, or damaged in any other way before using the unit.

S Maintain unit according to recommended pro- cedures. Keep cutting line at proper length.

S Use only 0.080(2 mm) diameter WEED EATER brand line. Never use wire, rope, string, etc.

S Install required shield properly before using the unit. Use only specified trimmer head; make sure it is properly installed and securely fastened.

S Make sure unit is assembled correctly as shown in this manual.

S Make carburetor adjustments with lower end supported to prevent line from contacting any object.

S Keep others away when making carburetor adjustments.

S Use only recommended WEED EATER ac- cessories and replacement parts.

S Have all maintenance and service not ex- plained in this manual performed by an autho- rized service dealer.

FUEL SAFETY

SMix and pour fuel outdoors.

SKeep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills. S Move at least 10 feet (3 meters) away from

fueling site before starting engine.

S Stop engine and allow to cool before remov- ing fuel cap.

S Always store gasoline in a container ap- proved for flammable liquids.

2

Image 2
Contents Manual de Instrucciones Manuel d’Instructions Unit / Maintenance Safety Safety RulesOperator Safety Fuel SafetyAdjusting the Handle AssemblyCutting Safety Transporting and StorageOperation Starting a Warm Engine HOW to Stop Your UnitHOW to Start Your Unit Trimmer Line Advance Starting a Flooded EngineOperating Position Cutting MethodsClean AIR Filter MaintenanceInspect and Clean Unit and Labels Check for Loose Fasteners and PartsCarburetor Adjustment Service and AdjustmentsLine Replacement Muffler and Spark ARREST- ING ScreenEngine Seasonal StorageFuel System OtherTroubleshooting Table Cause Remedy Limited Warranty Ligations The U.S. EnvironmentalRized service center or call Weed Eater at Consequential Damages Weed

FX26S, 545137264 specifications

The Weed Eater 545137264, FX26S is a versatile and robust string trimmer designed to meet the demands of both residential and professional users. This powerful tool is engineered for efficiency, precision, and comfort, making it an essential addition to any landscaping arsenal.

One of the standout features of the FX26S is its reliable 26cc 2-cycle engine. This engine balances power with fuel efficiency, enabling users to tackle dense grass and overgrown weeds with ease. The trimmer’s high-speed rotation allows for swift cutting capabilities, ensuring a clean and precise finish to any garden area. Additionally, the engine is designed to offer easier starting, reducing frustration for users and allowing for more time spent on the task at hand.

The FX26S also incorporates a lightweight design, weighing in at just under 10 pounds. This feature enhances user maneuverability, letting operators navigate around tight corners and intricate flower beds without strain. The adjustable D-handle and shoulder strap provide extra comfort and balance, further enhancing user experience during prolonged use.

Equipped with an innovative dual-line cutting system, the Weed Eater FX26S allows for a wider cutting swath, maximizing efficiency. The automatic line feed ensures that the trimmer maintains optimal line length, reducing downtime for line adjustments. This ergonomic approach to design makes it well-suited for tackling larger areas without continuous interruptions.

One of the technological highlights of the FX26S is its anti-vibration system. This feature minimizes hand fatigue, making it feasible to work for longer periods without discomfort. The trimmer is also easy to assemble and disassemble, facilitating quick storage and transportation.

The Weed Eater 545137264, FX26S is built with durability in mind. Its sturdy construction and quality materials ensure that the unit can withstand the rigors of frequent use, whether for residential yard work or professional landscaping. Furthermore, the trimmer is supported by a reliable warranty, providing peace of mind for users.

In summary, the Weed Eater 545137264, FX26S supports a combination of power, comfort, and innovative features. Its efficient engine, lightweight design, dual-line system, and anti-vibration technology contribute to a user-friendly experience that enhances productivity in lawn care tasks. This trimmer is an excellent choice for anyone looking to maintain a pristine yard or tackle tough landscaping jobs.