Weed Eater FX26S, 545137264 instruction manual Seasonal Storage, Fuel System, Engine, Other

Page 9

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool, and secure the unit before storing or transporting.

SStore unit and fuel in a well ventilated area

where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Fol- low the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

HELPFUL TIP

During storage of your gas/ oil mixture, the oil will sepa- rate from the gas.

We recommend that you shake the gas can weekly to insure proper blending of the gas and oil.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through

the spark plug opening. Slowly pull the starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

SReplace your gasoline can if it starts to rust.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Manual de Instrucciones Manuel d’Instructions Operator Safety Safety RulesUnit / Maintenance Safety Fuel SafetyCutting Safety AssemblyAdjusting the Handle Transporting and StorageOperation HOW to Stop Your Unit HOW to Start Your UnitStarting a Warm Engine Operating Position Starting a Flooded EngineTrimmer Line Advance Cutting MethodsInspect and Clean Unit and Labels MaintenanceClean AIR Filter Check for Loose Fasteners and PartsLine Replacement Service and AdjustmentsCarburetor Adjustment Muffler and Spark ARREST- ING ScreenFuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Ligations The U.S. Environmental Limited WarrantyConsequential Damages Weed Rized service center or call Weed Eater at

FX26S, 545137264 specifications

The Weed Eater 545137264, FX26S is a versatile and robust string trimmer designed to meet the demands of both residential and professional users. This powerful tool is engineered for efficiency, precision, and comfort, making it an essential addition to any landscaping arsenal.

One of the standout features of the FX26S is its reliable 26cc 2-cycle engine. This engine balances power with fuel efficiency, enabling users to tackle dense grass and overgrown weeds with ease. The trimmer’s high-speed rotation allows for swift cutting capabilities, ensuring a clean and precise finish to any garden area. Additionally, the engine is designed to offer easier starting, reducing frustration for users and allowing for more time spent on the task at hand.

The FX26S also incorporates a lightweight design, weighing in at just under 10 pounds. This feature enhances user maneuverability, letting operators navigate around tight corners and intricate flower beds without strain. The adjustable D-handle and shoulder strap provide extra comfort and balance, further enhancing user experience during prolonged use.

Equipped with an innovative dual-line cutting system, the Weed Eater FX26S allows for a wider cutting swath, maximizing efficiency. The automatic line feed ensures that the trimmer maintains optimal line length, reducing downtime for line adjustments. This ergonomic approach to design makes it well-suited for tackling larger areas without continuous interruptions.

One of the technological highlights of the FX26S is its anti-vibration system. This feature minimizes hand fatigue, making it feasible to work for longer periods without discomfort. The trimmer is also easy to assemble and disassemble, facilitating quick storage and transportation.

The Weed Eater 545137264, FX26S is built with durability in mind. Its sturdy construction and quality materials ensure that the unit can withstand the rigors of frequent use, whether for residential yard work or professional landscaping. Furthermore, the trimmer is supported by a reliable warranty, providing peace of mind for users.

In summary, the Weed Eater 545137264, FX26S supports a combination of power, comfort, and innovative features. Its efficient engine, lightweight design, dual-line system, and anti-vibration technology contribute to a user-friendly experience that enhances productivity in lawn care tasks. This trimmer is an excellent choice for anyone looking to maintain a pristine yard or tackle tough landscaping jobs.
Top Page Image Contents