Weed Eater 545186833 instruction manual Seasonal Storage, Fuel System, Engine, Other

Page 11

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool, and secure the unit

before storing or transporting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci- dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container.

Follow the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

HELPFUL TIP

During storage of your gas/ oil mixture, the oil will sepa- rate from the gas.

We recommend that you shake the gas can weekly to insure proper blending of the gas and oil.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom- mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to

another.

SReplace your gasoline can if it starts to rust.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Operator Safety Safety RulesTransporting and Storage Unit / Maintenance SafetyFuel Safety Cutting SafetyAttaching Shield AssemblyAdjusting the Assist Handle OperationPrimer Bulb Stop SwitchHOW to Stop Your Unit HOW to Start Your UnitTwist and Edge Starting a Warm EngineStarting a Flooded Engine Operating PositionDoes The Cutting Work Area Trimmer Line AdvanceCutting Methods Tip of the LineMaintenance Carburetor Idle Speed Adjustment Service and AdjustmentsLine Replacement Installing Spool with LineOther Seasonal StorageFuel System EngineTroubleshooting Table Cause Remedy Canada, contact Limited WarrantyIntermediate 125 hours Extended 300 hours

545186833 specifications

The Weed Eater 545186833 is an exceptional tool designed for homeowners and gardening enthusiasts seeking an efficient and reliable solution for lawn maintenance. This weed eater combines a powerful motor with lightweight design, making it suitable for both residential and commercial use.

One of the standout features of the Weed Eater 545186833 is its powerful 25cc two-cycle engine. This engine not only delivers a strong performance but also ensures that tough weeds and overgrown grass can be handled with ease. The engine is designed to provide a robust power-to-weight ratio, allowing for longer operation times without the fatigue often associated with heavier tools.

Ergonomics play a significant role in the design of the Weed Eater 545186833. It comes with a comfortable, adjustable handle that allows users to find the optimal position for trimming. This reduces strain on the arms and back, making it easier to work for extended periods. The lightweight design enhances maneuverability, enabling users to reach tight spots and navigate around landscaping features effectively.

The Weed Eater 545186833 features a dual-line bump feed head, which simplifies the process of reloading the cutting string. This technology allows users to release new line with a simple bump on the ground, ensuring that you can continue working without interruptions. The cutting width is an impressive 16 inches, allowing for quick trimming over larger areas, thus making the job more efficient.

Additionally, this model incorporates a straight shaft, which not only improves balance but also increases reach for tackling taller weeds. The durability of the materials used in its construction is evident, promising long-lasting performance even in tough environments.

Maintenance is straightforward with the Weed Eater 545186833 due to its easy-access air filter and spark plug, which allow for quick inspections and replacements. This feature ensures that your equipment remains in top shape throughout the seasons, reducing downtime.

In summary, the Weed Eater 545186833 packs robust performance, ergonomic design, and user-friendly technology into a lightweight package. Its features and characteristics make it a standout choice for anyone looking to maintain a pristine lawn or garden effortlessly. With this reliable tool at your disposal, tackling even the most stubborn weeds becomes a hassle-free task.
Top Page Image Contents