Weed Eater 545186833 Assembly, Operation, Adjusting the Assist Handle, Attaching Shield

Page 5

For normal homeowner use, the muffler and spark arresting screen will not require any ser- vice.

After 50 hours of use, we recommend that your muffler be serviced or replaced by your autho- rized service dealer.

ASSEMBLY

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.

It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

ADJUSTING THE ASSIST HANDLE

1.Loosen wing nut on handle.

2.Pivot the handle to a comfortable position; retighten wing nut.

Wing Nut

Groove

ATTACHING SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you.

For proper orientation of shield, see KNOW YOUR TRIMMER illustration in OPERATION section.

1.Remove wing nut from shield.

2.Insert bracket into slot as shown.

3.Pivot shield until bolt passes through hole in bracket.

4.Securely tighten wing nut onto bolt.

PIVOT Shield

Slot

 

Bracket

Line Limiter

 

Blade

 

 

Wing

 

Nut

OPERATION

KNOW YOUR TRIMMER

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

 

Shaft

Assist Handle

 

Muffler

 

 

 

 

 

 

 

Edge

 

 

 

 

Guide

 

Spark Plug

 

 

 

Shield

 

Primer Bulb

Throttle Trigger

 

 

 

 

 

 

STOP

 

 

 

 

Switch

 

Fuel Mix Fill Cap

 

 

 

 

Trimmer

 

 

 

 

Head

Line Limiter

 

Choke Lever

 

Blade

 

Starter Handle

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Operator Safety Safety RulesFuel Safety Unit / Maintenance SafetyCutting Safety Transporting and StorageAdjusting the Assist Handle AssemblyOperation Attaching ShieldHOW to Stop Your Unit Stop SwitchHOW to Start Your Unit Primer BulbStarting a Flooded Engine Starting a Warm EngineOperating Position Twist and EdgeCutting Methods Trimmer Line AdvanceTip of the Line Does The Cutting Work AreaMaintenance Line Replacement Service and AdjustmentsInstalling Spool with Line Carburetor Idle Speed AdjustmentFuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Canada, contact Limited WarrantyIntermediate 125 hours Extended 300 hours

545186833 specifications

The Weed Eater 545186833 is an exceptional tool designed for homeowners and gardening enthusiasts seeking an efficient and reliable solution for lawn maintenance. This weed eater combines a powerful motor with lightweight design, making it suitable for both residential and commercial use.

One of the standout features of the Weed Eater 545186833 is its powerful 25cc two-cycle engine. This engine not only delivers a strong performance but also ensures that tough weeds and overgrown grass can be handled with ease. The engine is designed to provide a robust power-to-weight ratio, allowing for longer operation times without the fatigue often associated with heavier tools.

Ergonomics play a significant role in the design of the Weed Eater 545186833. It comes with a comfortable, adjustable handle that allows users to find the optimal position for trimming. This reduces strain on the arms and back, making it easier to work for extended periods. The lightweight design enhances maneuverability, enabling users to reach tight spots and navigate around landscaping features effectively.

The Weed Eater 545186833 features a dual-line bump feed head, which simplifies the process of reloading the cutting string. This technology allows users to release new line with a simple bump on the ground, ensuring that you can continue working without interruptions. The cutting width is an impressive 16 inches, allowing for quick trimming over larger areas, thus making the job more efficient.

Additionally, this model incorporates a straight shaft, which not only improves balance but also increases reach for tackling taller weeds. The durability of the materials used in its construction is evident, promising long-lasting performance even in tough environments.

Maintenance is straightforward with the Weed Eater 545186833 due to its easy-access air filter and spark plug, which allow for quick inspections and replacements. This feature ensures that your equipment remains in top shape throughout the seasons, reducing downtime.

In summary, the Weed Eater 545186833 packs robust performance, ergonomic design, and user-friendly technology into a lightweight package. Its features and characteristics make it a standout choice for anyone looking to maintain a pristine lawn or garden effortlessly. With this reliable tool at your disposal, tackling even the most stubborn weeds becomes a hassle-free task.
Top Page Image Contents