Weed Eater 952711938 instruction manual Shaft Assembly, Adjusting the Handle, Attaching Shield

Page 5

ASSEMBLY

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723. It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

SHAFT ASSEMBLY

CAUTION: When assembling shaft, place the unit on a flat surface for stability.

1.Align grooves on upper and lower shafts.

Upper Shaft

Grooves

Lower Shaft

2.Push the two shafts together until the lower shaft is fully seated in the upper shaft (the shafts lock into place).

NOTE: If locking sleeve assembly will not tighten, the shafts are not fully seated.

ADJUSTING THE HANDLE

WARNING: When adjusting the assist handle, be sure it remains above the safety label and below the mark or arrow on the shaft.

1.Loosen wing nut on handle.

2.Rotate the handle on the shaft to an upright position; retighten wing nut.

ATTACHING SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you.

For proper orientation of shield, see KNOW YOUR TRIMMER illustration in OPERATION section.

1.Remove wing nut from shield.

2.Insert bracket into slot as shown.

3.Pivot shield until bolt passes through hole in bracket.

4.Securely tighten wing nut onto bolt.

Shield

Bracket

Slot

3.Slide lower locking sleeve assembly over upper locking sleeve assembly and tight- en by turning clockwise.

Upper Locking

Sleeve Assembly

Lower Locking

Sleeve Assembly

Wing Nut

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual de Instrucciones Manuel d’Instructions Hazard zone for thrown objects Identification of Safety SymbolsOperator Safety Safety RulesFuel Safety Unit / Maintenance SafetyCutting Safety Transporting and StorageShaft Assembly AssemblyAdjusting the Handle Attaching ShieldOperation HOW to Start Your Unit HOW to Stop Your UnitFuel Requirements Starting a Warm EngineOperating Position Starting a Flooded EngineTrimmer Line Advance Cutting MethodsInspect and Clean Unit and Labels MaintenanceClean AIR Filter Check for Loose Fasteners and PartsService and Adjustments Fuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Canada, contact Limited WarrantyStatesville Road Intermediate 125 hours Extended 300 hours

952711938 specifications

The Weed Eater 952711938 is a cutting-edge tool designed for homeowners and landscape professionals alike, showcasing remarkable features and technologies that enhance yard maintenance efficiency. This model is distinguished by its lightweight design, making it exceptionally easy to maneuver around gardens, flower beds, and hard-to-reach places. Weighing in at just a few pounds, users can operate it for extended periods without undue fatigue.

One of the standout features of the Weed Eater 952711938 is its powerful gas engine, which provides impressive performance while tackling thick grass and weeds. The engine is engineered for optimal power output, ensuring that users can complete their tasks swiftly and effectively. This model also features an automatic line feed system, which simplifies the process of maintaining the cutting line. With this technology, users can focus on their trimming duties without the hassle of manually adjusting the line length.

The dual-line cutting head of the Weed Eater 952711938 also enhances its efficiency. Equipped with two lines, it allows for a wider cutting path, enabling users to cover a larger area in fewer passes. This characteristic makes it an ideal choice for larger properties or landscaping projects that require thorough weed control.

Durability is another hallmark of the Weed Eater 952711938. Constructed with high-quality materials, it is built to withstand the rigors of regular use in varying outdoor conditions. The robust design not only increases the longevity of the tool but also minimizes maintenance needs.

A notable aspect of the Weed Eater 952711938 is its ergonomic handle design, which prioritizes user comfort. The adjustable handle can be customized to suit different user heights and preferences, reducing strain during operation. Additionally, the anti-vibration technology incorporated in the handle allows for a smoother operation, ensuring a more pleasant mowing experience.

Moreover, the unit is compatible with a variety of attachments, expanding its versatility. Whether users need to edge their lawn or clear brush, the Weed Eater 952711938 can adapt to various landscaping tasks with ease.

In conclusion, the Weed Eater 952711938 combines power, efficiency, and comfort in one user-friendly package. Its blend of advanced features, including a lightweight design, powerful engine, automatic line feed, dual-line cutting capability, and ergonomic considerations, makes it a valuable tool for homeowners and professionals looking to maintain a well-groomed yard. Investing in this model is a step toward enhancing your landscaping efforts and ensuring a pristine outdoor space.
Top Page Image Contents