Weed Eater 952711938 instruction manual Troubleshooting Table Cause Remedy

Page 12

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit.

 

TROUBLE

CAUSE

REMEDY

 

Engine will not

1. Engine flooded.

1.

See “Starting a Flooded Engine” in

 

start.

 

 

 

Operation Section.

 

 

2. Fuel tank empty.

2.

Fill tank with correct fuel mixture.

 

 

3. Spark plug not firing.

3.

Install new spark plug.

 

 

4. Fuel not reaching

4.

Check for dirty fuel filter; replace.

 

 

 

carburetor.

 

Check for kinked or split fuel line;

 

 

 

 

 

repair or replace.

 

 

5. Carburetor requires

5.

Contact an authorized service dealer.

 

 

 

adjustment.

 

 

 

 

 

 

 

 

 

Engine will

1.

Carburetor requires

1.

See “Carburetor Idle Speed Adjustment”

 

not idle

 

adjustment.

 

in Service and Adjustments Section.

 

properly.

2.

Crankshaft seals worn.

2.

Contact an authorized service dealer.

 

 

3.

Compression low.

3.

Contact an authorized service dealer.

 

Engine will not

1.

Air filter dirty.

1.

Clean or replace air filter.

 

accelerate,

2. Spark plug fouled.

2.

Clean or replace plug

 

lacks power,

3.

Carburetor requires

 

and regap.

 

or dies under

3.

Contact an authorized service dealer.

 

a load.

4.

adjustment.

4.

Contact an authorized service dealer.

 

 

Carbon build-up on

 

 

 

muffler outlet screen.

 

 

 

 

5.

Compression low.

5.

Contact an authorized service dealer.

 

Engine

1.

Fuel mixture incorrect.

1.

Empty fuel tank and refill with

 

smokes

 

 

 

correct fuel mixture.

 

excessively.

2.

Air filter dirty.

2.

Clean or replace air filter.

 

 

3.

Carburetor requires

3.

Contact an authorized service dealer.

 

 

 

adjustment.

 

 

 

Engine runs

1. Fuel mixture incorrect.

1.

See “Fueling Engine” in Operation

 

hot.

2. Spark plug incorrect.

2.

section.

 

 

Replace with correct spark plug.

 

 

3. Carburetor requires

3.

Contact an authorized service dealer.

 

 

 

adjustment.

 

 

 

 

4. Carbon build-up on

4.

Contact an authorized service dealer.

 

 

 

muffler outlet screen.

 

 

12

Image 12
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Hazard zone for thrown objectsSafety Rules Operator SafetyUnit / Maintenance Safety Fuel SafetyCutting Safety Transporting and StorageAssembly Shaft AssemblyAdjusting the Handle Attaching ShieldOperation HOW to Stop Your Unit HOW to Start Your UnitFuel Requirements Starting a Warm EngineStarting a Flooded Engine Operating PositionTrimmer Line Advance Cutting MethodsMaintenance Inspect and Clean Unit and LabelsClean AIR Filter Check for Loose Fasteners and PartsService and Adjustments Seasonal Storage Fuel SystemEngine OtherTroubleshooting Table Cause Remedy Limited Warranty Statesville RoadCanada, contact Intermediate 125 hours Extended 300 hours

952711938 specifications

The Weed Eater 952711938 is a cutting-edge tool designed for homeowners and landscape professionals alike, showcasing remarkable features and technologies that enhance yard maintenance efficiency. This model is distinguished by its lightweight design, making it exceptionally easy to maneuver around gardens, flower beds, and hard-to-reach places. Weighing in at just a few pounds, users can operate it for extended periods without undue fatigue.

One of the standout features of the Weed Eater 952711938 is its powerful gas engine, which provides impressive performance while tackling thick grass and weeds. The engine is engineered for optimal power output, ensuring that users can complete their tasks swiftly and effectively. This model also features an automatic line feed system, which simplifies the process of maintaining the cutting line. With this technology, users can focus on their trimming duties without the hassle of manually adjusting the line length.

The dual-line cutting head of the Weed Eater 952711938 also enhances its efficiency. Equipped with two lines, it allows for a wider cutting path, enabling users to cover a larger area in fewer passes. This characteristic makes it an ideal choice for larger properties or landscaping projects that require thorough weed control.

Durability is another hallmark of the Weed Eater 952711938. Constructed with high-quality materials, it is built to withstand the rigors of regular use in varying outdoor conditions. The robust design not only increases the longevity of the tool but also minimizes maintenance needs.

A notable aspect of the Weed Eater 952711938 is its ergonomic handle design, which prioritizes user comfort. The adjustable handle can be customized to suit different user heights and preferences, reducing strain during operation. Additionally, the anti-vibration technology incorporated in the handle allows for a smoother operation, ensuring a more pleasant mowing experience.

Moreover, the unit is compatible with a variety of attachments, expanding its versatility. Whether users need to edge their lawn or clear brush, the Weed Eater 952711938 can adapt to various landscaping tasks with ease.

In conclusion, the Weed Eater 952711938 combines power, efficiency, and comfort in one user-friendly package. Its blend of advanced features, including a lightweight design, powerful engine, automatic line feed, dual-line cutting capability, and ergonomic considerations, makes it a valuable tool for homeowners and professionals looking to maintain a well-groomed yard. Investing in this model is a step toward enhancing your landscaping efforts and ensuring a pristine outdoor space.