Trouble shooting
No reception or disturbed reception
The operation indicator doesn’t light up – the Quadpack is not powered:
ECheck if the mains unit is connected to the mains and if the POWER (ON/OFF) switch is set to position “I”.
EPlug the mains connector to a wall socket, connect the mains unit to the Quadpack and set the POWER (ON/OFF) switch to position “I”. The operation indicator lights up red.
The Quadpack’s power supply has already been checked, but the operation indicator still doesn’t light up – the fuse of the Quadpack has been triggered:
ECheck every unused receiver slot for objects that might have triggered the fuse and remove these objects.
ECheck the DC polarity of the power supply. The correct polarity is shown in the diagram next to the socket!
ESet the POWER (ON/OFF) switch to position “0”.
E Unscrew and remove the fuse holder I.
E
E
E Replace the fuse holder I and screw it tight.
E Set the POWER (ON/OFF) switch to position “I”.
The operation indicator E lights up red.
I
The receiver display remains dark – the receiver has not been turned on:
EPress the ON button on the receiver. The receiver display indicates the selected frequency or the channel number.
Selective input modules are used but the selected transmission and receiving frequencies are not within the frequency window of the selective input modules:
ESet all transmitters and receivers operated with the Quadpack to frequencies that are within the frequency window of the selective input module.
The frequency window of the selective input modules is printed onto the modules.
The antennas are not connected correctly:
ECheck all antenna connections. If two
29