Mounting the antennas to the front of the Quadpack
If your Quadpacks are to be mounted into a rack or a tower, the antennas can be connected to the front side by using the GA 3030 AM antenna mount (see „Accessories” on page 31).
EMount the antenna holders D to the two outer handles of the two Quad-
packs as shown in the diagram on the left. Fasten the antenna holders by means of the supplied four screws and plain washers to the prepared holes.
E Guide the two cables sideways to the rear of the Quadpacks.
If you wish to mount the two Quadpacks into a rack, fix the two cables C of the GA 3030 AM antenna mount to the rack mount “ears” B as shown in the diagram on the left.
E Connect the two telescopic antennas to the antenna holders D and align the antennas upwards.
D C B
Daisy-chaining two Quadpacks
If you
EConnect one antenna or one cable C of the GA 3030 AM antenna mount to the BNC socket “ANT. A” O of each Quadpack.
P O Q P O Q
* = to the antennas mounted to the front of the rack.
EConnect the BNC socket “RF OUT A” Q of each Quadpack to the BNC socket “ANT. B” P of the other Quadpack as shown in the diagram above.
26