Sennheiser qp 3041 instruction manual RF characteristics, Selective input module accessory

RF characteristics

Frequency range:	470–870 MHz
Nominal impedance of the inputs/outputs:	50 W
Selective input module (accessory)
Variable two-circuit bandpass filter
Frequency range:	470–870 MHz
Bandwidth –3 dB	£ 60 MHz
Audio section, line level outputs
Outputs:	electronically balanced
Frequency response:	40 Hz–18 kHz ±0.5 dB
Max. output level (at ±56 kHz deviation, 1 kHz):	+18 dBu ±1 dB, RL ³ 10 kW
THD (at ±40 kHz deviation, 1 kHz):	£ 1 %
S/Nmax:	³110 dB (A)
DC reversed powering protection of audio outputs:	£ 55 V; Ri ³ 6.8 kW (P48)
Audio section, mic level outputs
Outputs:	transformer balanced
Frequency response:	40 Hz–18 kHz ±0.5 dB
Output level (at ±56 kHz deviation, 1 kHz):	–10 dBu ±1 dB, RL ³ 10 kW
THD (at ±40 kHz deviation, 1 kHz):	£ 1 %
S/Nmax:	³ 110 dB
Audio section, monitor output
Frequency response:	40 Hz–18 kHz ±0.5 dB
Output level (at ±56 kHz deviation, 1 kHz):	³ 1,3 Vrms, RL ³ 32 W
THD (at ±40 kHz deviation, 1 kHz):	£ 1 %
S/Nmax:	³ 90 dB

33