J
E
C D G
Operation
Operating the receivers
The EK 3041 receivers mounted into the Quadpack are operated as ususal.
Turning the Quadpack on and off
ETo turn the Quadpack on, set the POWER (ON/OFF) switch J to posi- tion “I”. The operation indicator E lights up red.
ETo turn the Quadpack off, set the POWER (ON/OFF) switch J to position “0”. The operation indicator E goes off.
Note:
All receivers mounted into the Quadpack are turned on and off via the Quadpack’s POWER (ON/OFF) switch. If required, the individual receivers can be turned on and off via their respective ON buttons.
Monitoring
For monitoring the audio signals of the mounted receivers, connect a pair of headphones to the headphone output G.
EPress the monitor key C of the receiver whose audio signal you wish to monitor. The color of the control LED D of the selected receiver chan- ges from red to green.
EYou can also press several monitor keys if you wish to monitor the audio signals of several receivers simultaneously. The control LEDs of all selected receivers light up green.
Note:
The monitor output has enough amplification headroom in order to enable monitoring even at low modulation levels. The volume at the monitor output should therefore only be turned up gradually!
28
