Connecting the telescopic antennas
The Quadpack can be used with either telescopic antennas (supplied) or remote antennas (available as accessories). The telescopic antennas can be mounted quickly and easily and are suitable for all applications where – good reception conditions provided – a wireless transmission system is to be used without a large amount of installation work.
EConnect the telescopic antennas to BNC sockets O and P.
E Pull the antennas out and align them upwards in a
Note:
If the receiver position is not the best antenna position for optimum reception, you can use remote antennas. Active and passive remote antennas are available as accessories (see „Accessories” on page 31). Active antennas can be supplied via the antenna sockets of the Quadpack.
PO
Connecting the external mains unit (accessory)
The external mains unit (available as an accessory) powers both the Quadpack and the mounted receivers.
E Insert the
E Connect the mains unit to the mains.
H
Connecting a mixing console or amplifier
The audio signals of the receivers are available – for each receiver separately – at the four
EConnect the mixing console or amplifier to the
the rear of the Quadpack.
E Use the
E Use the AF output level controls K to adjust the output levels.
K L M
Note:
The AF outputs of the Quadpack can also be connected to an AF input that has been designed for condenser microphones with phantom powering (P 48 ). The AF outputs of the Quadpack are protected against phantom powering.
24