Maintenance, Check for Damaged or Worn Parts

Trimming

3 inches (8 cm) above ground

SCALPING -- The scalping technique re- moves unwanted vegetationdown to the ground. Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique increases line wear.

Scalping

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot

reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

MAINTENANCE

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, WEED EATER may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screws S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

SSTOP Switch -- Ensure STOP switch func- tions properly by pushing and holding the switch in the STOP position. Make sure en- gine stops. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the air filter cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is opened.

2.Open air filter cover by pushing button

(see illustration). Remove air filter. NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Replace air filter and close cover.

Button

Air Filter

Air Filter Cover

952711938 specifications

The Weed Eater 952711938 is a cutting-edge tool designed for homeowners and landscape professionals alike, showcasing remarkable features and technologies that enhance yard maintenance efficiency. This model is distinguished by its lightweight design, making it exceptionally easy to maneuver around gardens, flower beds, and hard-to-reach places. Weighing in at just a few pounds, users can operate it for extended periods without undue fatigue.

One of the standout features of the Weed Eater 952711938 is its powerful gas engine, which provides impressive performance while tackling thick grass and weeds. The engine is engineered for optimal power output, ensuring that users can complete their tasks swiftly and effectively. This model also features an automatic line feed system, which simplifies the process of maintaining the cutting line. With this technology, users can focus on their trimming duties without the hassle of manually adjusting the line length.

The dual-line cutting head of the Weed Eater 952711938 also enhances its efficiency. Equipped with two lines, it allows for a wider cutting path, enabling users to cover a larger area in fewer passes. This characteristic makes it an ideal choice for larger properties or landscaping projects that require thorough weed control.

Durability is another hallmark of the Weed Eater 952711938. Constructed with high-quality materials, it is built to withstand the rigors of regular use in varying outdoor conditions. The robust design not only increases the longevity of the tool but also minimizes maintenance needs.

A notable aspect of the Weed Eater 952711938 is its ergonomic handle design, which prioritizes user comfort. The adjustable handle can be customized to suit different user heights and preferences, reducing strain during operation. Additionally, the anti-vibration technology incorporated in the handle allows for a smoother operation, ensuring a more pleasant mowing experience.

Moreover, the unit is compatible with a variety of attachments, expanding its versatility. Whether users need to edge their lawn or clear brush, the Weed Eater 952711938 can adapt to various landscaping tasks with ease.

In conclusion, the Weed Eater 952711938 combines power, efficiency, and comfort in one user-friendly package. Its blend of advanced features, including a lightweight design, powerful engine, automatic line feed, dual-line cutting capability, and ergonomic considerations, makes it a valuable tool for homeowners and professionals looking to maintain a well-groomed yard. Investing in this model is a step toward enhancing your landscaping efforts and ensuring a pristine outdoor space.