Maintenance, Service and Adjustments | Weed Eater 545117527 specification

MAINTENANCE

WARNING: Disconnect power source before performing maintenance.

GENERAL RECOMMENDATIONS

The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjust- ments will need to be made periodically to properly maintain your unit.

BEFORE EACH USE

CHECK FOR LOOSE

FASTENERS AND PARTS

SHousing Screws S Assist Handle S Debris Shield

S Edge Guide

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

STrigger Switch -- Ensure switch functions properly by pressing and releasing the trig-

ger switch. Make sure motor stops.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

AFTER EACH USE

INSPECT AND CLEAN UNIT AND DE- CALS

SAfter each use, inspect complete unit for

loose or damaged parts. Clean the unit us- ing a damp cloth with a mild detergent.

SWipe off unit with a clean dry cloth.

SERVICE AND ADJUSTMENTS

REPLACING THE LINE

Pre--wound spools offer the most convenient method for replacing line and ensuring opti- mum performance.

SReplacement spools are color--coded to ensure use of the correct spool with your unit. Be sure to use the same color spool as

the existing spool.

NOTE: Always clear dirt and debris from cut- ting head components when performing any type of maintenance.

SHold spool and unscrew cap by turning in

the direction shown on top of the cap.

SRemove line guide ring and spool.

Feed line in direction shown on spool.

Spool

Cap

Line guide ring

Spool

2.Insert one end of line into center cavity of empty spool. Ensure line will feed into spool in the direction shown on the spool (counterclockwise).

3.Continue feeding line into spool, leaving 4 -- 6 inches (10 -- 15 cm) unwound from center of spool.

INSTALLING SPOOL WITH LINE

Use a pre--wound spool or refill spool with line. If using a pre--wound spool, remove tape strip from line and spool.

REFILLING THE SPOOL WITH LINE

WARNING: Use only 0.065 inch (1.65 mm) diameter round line. Other sizes and shapes of line will not advance properly and will result in improper cutting head func- tion or can cause serious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off during cutting and become a dangerous missile that can cause serious injury.

1.Cut a length of 25 feet of 0.065 inch (1.65

mm)diameter round WEED EATER

brand line.

1.Install replacement spool.

2.Thread line through line guide ring.

Line through guide ring

Slot

Replacement Spool

3.Rest guide ring on spool and place line in slot. Allow line to extend 4 -- 6 inches (10 -- 15 cm) from center of spool.

4.Ensure line remains in slot while screwing cap on to the shaft. Only tighten cap hand tight!

545117527 specifications

The Weed Eater 545117527 is a powerful and versatile string trimmer that has gained a reputation for its reliability and performance in yard maintenance. Designed for both residential and light commercial use, this trimmer is equipped with a range of features that make it an essential tool for keeping lawns and gardens neat and tidy.

One of the main features of the Weed Eater 545117527 is its lightweight design, which allows users to maneuver the trimmer easily without experiencing fatigue during extended use. Weighing in at just under 10 pounds, it is easy to carry and operate, making it an excellent choice for both novice gardeners and seasoned landscapers alike.

The trimmer is powered by a robust 25cc 2-cycle engine that delivers ample power for cutting through thick grass and weeds. This engine provides a high RPM output, ensuring that the cutting head rotates at a speed that allows for efficient trimming. The 2-cycle engine is not only powerful but also offers an excellent power-to-weight ratio, allowing users to tackle tough jobs without being bogged down.

Another notable feature of the Weed Eater 545117527 is its spool design, which utilizes an automatic bump feed system. This system allows users to easily advance the cutting line simply by tapping the trimmer head on the ground while in use. This convenience means that gardeners can focus on their trimming tasks without having to stop and manually feed the line, making the process more efficient.

The adjustable handle of the Weed Eater 545117527 provides further customization for user comfort. The design includes a D-handle, which can be adjusted to fit different user heights and preferences. This feature not only enhances comfort but also promotes better control of the trimmer, allowing for more precise trimming in hard-to-reach places.

In terms of durability, the Weed Eater 545117527 is built with high-quality materials that can withstand the rigors of frequent use. The trimmer's robust construction ensures that it will hold up well over time, even when used in challenging outdoor environments. Additionally, maintenance is simplified due to easily accessible components, allowing users to perform routine checks and repairs without hassle.

Overall, the Weed Eater 545117527 is an exceptional choice for anyone looking for a reliable and efficient string trimmer. With its lightweight design, powerful engine, automatic line feed, adjustable handle, and durable construction, this trimmer offers everything needed to keep outdoor spaces well-groomed and aesthetically pleasing. Whether you are trimming edges, tackling overgrown areas, or maintaining flower beds, the Weed Eater 545117527 stands out as a dependable tool for all your yard maintenance needs.