Weed Eater 545117527 Assembly, Adjusting Assist Handle, Attaching the Shield, Edge Guide

Page 4

ASSEMBLY

WARNING: If received assembled, review all assembly steps to ensure your unit is properly assembled and all fasteners are secure.

ADJUSTING ASSIST HANDLE

1.Loosen and remove wing nut and bolt from assist handle.

2.Place unit on a flat surface.

3.Firmly push the assist handle over the tube. To make installation easier, tilt han- dle toward trigger housing while pushing down (see illustration).

4.Reinstall bolt in handle. Thread wing nut onto bolt.

5.Adjust the handle up or down the tube to a comfortable position; tighten wing nut se- curely.

ATTACHING THE SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protection to the operator and others from the risk of thrown objects. Your unit is equipped with a line limiter blade, which cuts excess line to the proper length while running. The line limiter blade (on underside of shield) is sharp and can cut you.

NOTE: If shield is not properly installed, dam- age to unit (including motor failure) will result.

1.Insert edge guide into two holes in shield. NOTE: Edge guide must be positioned on shield prior to installation on motor housing (see following illustration).

Edge Guide

Front

Locking

Tab

Rear Locking

Tabs

Shield

2.Place shield over cutting head at an angle to the motor housing. Insert front locking tab on shield into opening in front of motor housing.

Shield

Opening for

Front

Locking Tab

Cutting Head

Motor Housing

3. Keep front locking tab in the motor housing.

Cutting Head

Shield

4.Push shield toward motor housing until rear locking tabs snap into rear notches. An audible snap must be heard. Ensure the cutting head remains free to rotate and the line is not caught between the shield and the motor housing.

Shield

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Advertencia AvertissementOperator Safety Safety RulesElectrical Safety Unit Safety Cutting SafetyMaintenance Safety Transporting and StorageAssembly Adjusting Assist HandleAttaching the Shield Edge GuideOperation Operating InstructionsSist handle with left hand Keep unit below waist level Advancing the Cutting LineInches 8 cm above ground Maintenance Service and AdjustmentsBefore Each USE After Each USEUser Replaceable Service Parts Troubleshooting Table Cause RemedyElectrical failure Incorrect line sizeLimited Warranty

545117527 specifications

The Weed Eater 545117527 is a powerful and versatile string trimmer that has gained a reputation for its reliability and performance in yard maintenance. Designed for both residential and light commercial use, this trimmer is equipped with a range of features that make it an essential tool for keeping lawns and gardens neat and tidy.

One of the main features of the Weed Eater 545117527 is its lightweight design, which allows users to maneuver the trimmer easily without experiencing fatigue during extended use. Weighing in at just under 10 pounds, it is easy to carry and operate, making it an excellent choice for both novice gardeners and seasoned landscapers alike.

The trimmer is powered by a robust 25cc 2-cycle engine that delivers ample power for cutting through thick grass and weeds. This engine provides a high RPM output, ensuring that the cutting head rotates at a speed that allows for efficient trimming. The 2-cycle engine is not only powerful but also offers an excellent power-to-weight ratio, allowing users to tackle tough jobs without being bogged down.

Another notable feature of the Weed Eater 545117527 is its spool design, which utilizes an automatic bump feed system. This system allows users to easily advance the cutting line simply by tapping the trimmer head on the ground while in use. This convenience means that gardeners can focus on their trimming tasks without having to stop and manually feed the line, making the process more efficient.

The adjustable handle of the Weed Eater 545117527 provides further customization for user comfort. The design includes a D-handle, which can be adjusted to fit different user heights and preferences. This feature not only enhances comfort but also promotes better control of the trimmer, allowing for more precise trimming in hard-to-reach places.

In terms of durability, the Weed Eater 545117527 is built with high-quality materials that can withstand the rigors of frequent use. The trimmer's robust construction ensures that it will hold up well over time, even when used in challenging outdoor environments. Additionally, maintenance is simplified due to easily accessible components, allowing users to perform routine checks and repairs without hassle.

Overall, the Weed Eater 545117527 is an exceptional choice for anyone looking for a reliable and efficient string trimmer. With its lightweight design, powerful engine, automatic line feed, adjustable handle, and durable construction, this trimmer offers everything needed to keep outdoor spaces well-groomed and aesthetically pleasing. Whether you are trimming edges, tackling overgrown areas, or maintaining flower beds, the Weed Eater 545117527 stands out as a dependable tool for all your yard maintenance needs.
Top Page Image Contents