Weed Eater 952711940 instruction manual Seasonal Storage, Fuel System, Engine, Other

Page 11

Idle Speed Screw

Air Filter Cover

If you require further assistance or are unsure about performing this procedure, contact an

authorized

service dealer or call

1--

800--

554--

6723.

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool, and secure the unit

before storing or transporting.

SStore unit and fuel in a well ventilated area

where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean the entire unit before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Fol- low the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

HELPFUL TIP

During storage of your gas/ oil mixture, the oil will sepa- rate from the gas.

We recommend that you shake the gas can weekly to insure proper blending of the gas and oil.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

SReplace your gasoline can if it starts to rust.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Manual de Instrucciones Manuel d’Instructions Hazard zone for thrown objects Identification of Safety SymbolsOperator Safety Safety RulesTransporting and Storage Unit / Maintenance SafetyFuel Safety Cutting SafetyAttaching Shield AssemblyShaft Assembly Adjusting the HandleOperation Starting a Warm Engine HOW to Stop Your UnitHOW to Start Your Unit Fuel RequirementsCutting Methods Starting a Flooded EngineOperating Position Maintenance Replace Spark Plug Service and AdjustmentsLine Replacement Carburetor Idle Speed AdjustmentOther Seasonal StorageFuel System EngineTroubleshooting Table Cause Remedy Canada, contact Limited WarrantyStatesville Road Intermediate 125 hours Extended 300 hours

952711940 specifications

The Weed Eater 952711940 is a cutting-edge string trimmer that stands out in the outdoor power equipment market for its robust performance, user-friendly features, and innovative technologies. Designed to make yard maintenance easier and more efficient, this tool is perfect for homeowners looking to maintain a manicured lawn or tackle overgrown areas of their property.

One of the key features of the Weed Eater 952711940 is its lightweight design, which allows for easy maneuverability during operation. Weighing in at just under 10 pounds, this trimmer is easy to handle and reduces fatigue during extended use. Its ergonomic handle provides a comfortable grip, enabling users to navigate tight spaces and difficult angles with confidence.

The 952711940 boasts a powerful 25cc two-stroke engine that delivers consistent performance and makes quick work of weeds, grass, and brush. This engine is designed for efficient fuel consumption, allowing for longer runtime without frequent re-fueling. Coupled with a robust cutting width, this trimmer can cover more ground in less time, making it an invaluable tool for maintaining larger yards and gardens.

Another notable aspect is the innovative bump-head line release system. This technology allows users to easily advance the cutting line by simply bumping the trimmer's head against the ground, eliminating the need for manual line adjustments. This feature significantly improves efficiency and ensures that the cutting line is always at the optimal length for effective trimming.

The Weed Eater 952711940 also incorporates a dual line system. This ensures a clean, efficient cut, allowing the user to tackle thicker grass and tougher weeds with ease. The trimmer’s cutting line is designed to be durable and long-lasting, minimizing the need for frequent replacements, further enhancing user convenience.

For safety and ease of use, the trimmer features an easy-start mechanism, which reduces pull resistance during ignition. This technology helps less experienced users start the trimmer effortlessly while ensuring reliable performance in various conditions.

In summary, the Weed Eater 952711940 is an exceptional string trimmer that combines power, efficiency, and user-friendly features to provide an outstanding trimming experience. With its lightweight design, innovative technologies, and durable construction, it is an ideal choice for both novice and seasoned gardeners alike. Whether you are maintaining a small yard or tackling overgrown areas, the Weed Eater 952711940 is equipped to meet your landscaping needs.
Top Page Image Contents