Weed Eater 952711940 instruction manual Shaft Assembly, Adjusting the Handle, Attaching Shield

Page 5

ASSEMBLY

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723. It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

SHAFT ASSEMBLY

CAUTION: When assembling shaft, place the unit on a flat surface for stability.

1.Align grooves on upper and lower shafts.

Upper Shaft

Grooves

Lower Shaft

2.Push the two shafts together until the lower shaft is fully seated in the upper shaft (the shafts lock into place).

NOTE: If locking sleeve assembly will not tighten, the shafts are not fully seated.

ADJUSTING THE HANDLE

WARNING: When adjusting the assist handle, be sure it remains above the safety label and below the mark or arrow on the shaft.

1.Loosen wing nut on handle.

2.Rotate the handle on the shaft to an upright position; retighten wing nut.

ATTACHING SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you.

For proper orientation of shield, see KNOW YOUR TRIMMER illustration in OPERATION section.

1.Remove wing nut from shield.

2.Insert bracket into slot as shown.

3.Pivot shield until bolt passes through hole in bracket.

4.Securely tighten wing nut onto bolt.

Shield

Bracket

Slot

3.Slide lower locking sleeve assembly over upper locking sleeve assembly and tight- en by turning clockwise.

Upper Locking

Sleeve Assembly

Lower Locking

Sleeve Assembly

Wing Nut

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual de Instrucciones Manuel d’Instructions Hazard zone for thrown objects Identification of Safety SymbolsOperator Safety Safety RulesFuel Safety Unit / Maintenance SafetyCutting Safety Transporting and StorageShaft Assembly AssemblyAdjusting the Handle Attaching ShieldOperation HOW to Start Your Unit HOW to Stop Your UnitFuel Requirements Starting a Warm EngineCutting Methods Starting a Flooded EngineOperating Position Maintenance Line Replacement Service and AdjustmentsCarburetor Idle Speed Adjustment Replace Spark PlugFuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Canada, contact Limited WarrantyStatesville Road Intermediate 125 hours Extended 300 hours

952711940 specifications

The Weed Eater 952711940 is a cutting-edge string trimmer that stands out in the outdoor power equipment market for its robust performance, user-friendly features, and innovative technologies. Designed to make yard maintenance easier and more efficient, this tool is perfect for homeowners looking to maintain a manicured lawn or tackle overgrown areas of their property.

One of the key features of the Weed Eater 952711940 is its lightweight design, which allows for easy maneuverability during operation. Weighing in at just under 10 pounds, this trimmer is easy to handle and reduces fatigue during extended use. Its ergonomic handle provides a comfortable grip, enabling users to navigate tight spaces and difficult angles with confidence.

The 952711940 boasts a powerful 25cc two-stroke engine that delivers consistent performance and makes quick work of weeds, grass, and brush. This engine is designed for efficient fuel consumption, allowing for longer runtime without frequent re-fueling. Coupled with a robust cutting width, this trimmer can cover more ground in less time, making it an invaluable tool for maintaining larger yards and gardens.

Another notable aspect is the innovative bump-head line release system. This technology allows users to easily advance the cutting line by simply bumping the trimmer's head against the ground, eliminating the need for manual line adjustments. This feature significantly improves efficiency and ensures that the cutting line is always at the optimal length for effective trimming.

The Weed Eater 952711940 also incorporates a dual line system. This ensures a clean, efficient cut, allowing the user to tackle thicker grass and tougher weeds with ease. The trimmer’s cutting line is designed to be durable and long-lasting, minimizing the need for frequent replacements, further enhancing user convenience.

For safety and ease of use, the trimmer features an easy-start mechanism, which reduces pull resistance during ignition. This technology helps less experienced users start the trimmer effortlessly while ensuring reliable performance in various conditions.

In summary, the Weed Eater 952711940 is an exceptional string trimmer that combines power, efficiency, and user-friendly features to provide an outstanding trimming experience. With its lightweight design, innovative technologies, and durable construction, it is an ideal choice for both novice and seasoned gardeners alike. Whether you are maintaining a small yard or tackling overgrown areas, the Weed Eater 952711940 is equipped to meet your landscaping needs.
Top Page Image Contents