Service and Adjustments, Replace Spark Plug

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch (0.6 mm). Igni- tion timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

SERVICE AND ADJUSTMENTS

LINE REPLACEMENT

1.Remove spool by firmly pulling on tap button.

2.Clean entire surface of hub and spool.

3.Replace with a pre-wound spool, or cut two lengths of 12-1/2 feet of 0.080″ (2 mm) di- ameter WEED EATER brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert ends of the lines about 1/2 inch (1 cm) into the small holes on the inside of spool.

Spool

Small

Holes

Line exit holes

Line in Notch

Hub

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrows found on the spool.

6.Push the lines into the notches, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the lines into the the exit holes in the hub as shown in the illustration.

8.Align the notches with the line exit holes.

9.Push spool into hub until it snaps into place.

10.Pull the lines extending outside of the hub to release the lines from the notches.

REPLACING THE TRIMMER HEAD

1.Hold the dust cup with a wrench to keep the shaft from turning while removing and installing trimmer head.

Dust Cup

2.Remove trimmer head by turning counter- clockwise (looking from bottom of unit).

3.Thread replacement trimmer head onto the shaft by turning clockwise. Only tighten hand tight!

CARBURETOR IDLE SPEED

ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The trimmer head will be spinning during this procedure. Wear your protective equipment and observe all safety precautions.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is re- leased.

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

To adjust idle speed:

Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow).

S Turn idle speed screw clockwise to in- crease engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed.

Idle Speed Screw

Air Filter Cover

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723.

FX26 specifications

The Weed Eater FX26 is a versatile and powerful tool designed for both homeowners and professionals who need an efficient solution for landscaping, lawn maintenance, and garden upkeep. Known for its reliability and ease of use, the FX26 stands out in the market of gas-powered trimmers.

One of the primary features of the FX26 is its robust 26cc, 2-cycle engine. This engine offers a perfect balance between power and lightweight design, making it easier to maneuver compared to heavier models. The power provided by the engine enables it to tackle tougher weeds and grass with minimal effort, ensuring a clean and precise cutting experience.

The mechanism of the FX26 includes a dual line feed system, which allows for an efficient trimming process. The design promotes a continuous and smooth performance, as the trimmer automatically feeds more line as you work. This means that users can focus on their cutting tasks without interruptions to change the trimmer line, making the process more efficient and less time-consuming.

Another notable characteristic of the Weed Eater FX26 is its adjustable handle. Designed for user comfort, it allows for operation in various positions, ensuring that users can find a comfortable grip that reduces fatigue during extended use. The handle's ergonomic design contributes to the overall user experience, allowing homeowners and professionals to work for longer periods without discomfort.

In terms of technology, the FX26 incorporates innovations such as the Easy Start system. This feature makes starting the trimmer straightforward, requiring less effort than traditional pull-start mechanisms. The engine is designed for easy maintenance, with accessible components that allow users to perform routine checks and repairs without hassle.

Additionally, the FX26 is engineered for durability. The materials used in its construction are robust and resistant to wear and tear, ensuring that the trimmer can withstand regular use in demanding conditions. Its lightweight design, combined with its rugged construction, makes it an ideal choice for those looking for a reliable and efficient trimmer.

Overall, the Weed Eater FX26 is a powerful, user-friendly option that meets the needs of both casual users and landscaping professionals. With its combination of performance, comfort, and innovative features, it is an excellent addition to any gardening toolkit. Whether you’re maintaining your yard or tackling larger landscaping projects, the FX26 offers the reliability and efficiency needed for successful outdoor work.