Unit / Maintenance Safety, Fuel Safety

SSecure hair above shoulder length. Secure or remove loose clothing or clothing with loosely

hanging ties, straps, tassels, etc. They can be caught in moving parts.

S Being fully covered also helps protect you from debris and pieces of toxic plants thrown by spinning line.

SStay Alert. Do not operate this unit when you are tired, ill, upset or under the influence of al- cohol, drugs, or medication. Watch what you are doing; use common sense.

SWear hearing protection.

SNever start or run inside a closed room or

building. Breathing exhaust fumes can kill.

SKeep handles free of oil and fuel.

UNIT / MAINTENANCE SAFETY

WARNING: Disconnect the spark plug before performing maintenance except carburetor adjustments.

SLook for and replace damaged or loose parts before each use. Look for and repair fuel

leaks before use. Keep in good working condition.

SReplace trimmer head parts that are chipped, cracked, broken, or damaged in any other

way before using the unit.

SMaintain unit according to recommended pro- cedures. Keep cutting line at proper length.

S Use only 0.080″ (2 mm) diameter WEED EATER brand line. Never use wire, rope, string, etc.

SInstall required shield properly before using the unit. Use only specified trimmer head; make sure it is properly installed and securely

fastened.

S Make sure unit is assembled correctly as shown in this manual.

SMake carburetor adjustments with lower end

supported to prevent line from contacting any object.

SKeep others away when making carburetor

adjustments.

SUse only recommended WEED EATER ac-

cessories and replacement parts.

SHave all maintenance and service not ex- plained in this manual performed by an autho- rized service dealer.

FUEL SAFETY

SMix and pour fuel outdoors.

SKeep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills. S Move at least 10 feet (3 meters) away from

fueling site before starting engine.

S Stop engine and allow to cool before remov- ing fuel cap.

S Always store gasoline in a container ap- proved for flammable liquids.

CUTTING SAFETY

WARNING: Inspect the area before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by or become entangled in line. Hard objects can damage the trimmer head and be thrown causing serious injury.

S Keep others including children, animals, bystanders, and helpers at least 50 feet (15 meters) away. Bystanders should be encour- aged to wear safety glasses. Stop engine immediately if you are approached.

SUse only for trimming, scalping, mowing and sweeping. Do not use for edging, pruning or

hedge trimming.

SKeep firm footing and balance. Do not over- reach.

SKeep all parts of your body away from muffler and spinning line. Keep engine below waist

level. A hot muffler can cause serious burns.

SCut from your right to your left. Cutting on left

side of the shield will throw debris away from the operator.

SUse only in daylight or good artificial light. S Use only for jobs explained in this manual.

TRANSPORTING AND STORAGE

SAllow engine to cool; secure unit before stor- ing or transporting in vehicle.

SEmpty the fuel tank before storing or trans- porting the unit. Use up fuel left in the carbure-

tor by starting the engine and letting it run until it stops.

SStore unit and fuel in area where fuel vapors cannot reach sparks or open flames from wa-

ter heaters, electric motors or switches, fur- naces, etc.

SStore unit so line limiter blade cannot acciden- tally cause injury. The unit can be hung by the shaft.

SStore unit out of reach of children.

WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnor- mal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti--vibration system does not guarantee the avoidance of these problems. Users who oper- ate power tools on a continual and regular basis must monitor closely their physical condition and the condition of this tool.

SPECIAL NOTICE: This unit is equipped with a temperature limiting muffler and spark arresting screen which meets the require- ments of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Ore- gon, and Washington require by law that many internal combustion engines be equipped with a spark arresting screen. If you operate in a locale where such regulations ex- ist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law.

FX26 specifications

The Weed Eater FX26 is a versatile and powerful tool designed for both homeowners and professionals who need an efficient solution for landscaping, lawn maintenance, and garden upkeep. Known for its reliability and ease of use, the FX26 stands out in the market of gas-powered trimmers.

One of the primary features of the FX26 is its robust 26cc, 2-cycle engine. This engine offers a perfect balance between power and lightweight design, making it easier to maneuver compared to heavier models. The power provided by the engine enables it to tackle tougher weeds and grass with minimal effort, ensuring a clean and precise cutting experience.

The mechanism of the FX26 includes a dual line feed system, which allows for an efficient trimming process. The design promotes a continuous and smooth performance, as the trimmer automatically feeds more line as you work. This means that users can focus on their cutting tasks without interruptions to change the trimmer line, making the process more efficient and less time-consuming.

Another notable characteristic of the Weed Eater FX26 is its adjustable handle. Designed for user comfort, it allows for operation in various positions, ensuring that users can find a comfortable grip that reduces fatigue during extended use. The handle's ergonomic design contributes to the overall user experience, allowing homeowners and professionals to work for longer periods without discomfort.

In terms of technology, the FX26 incorporates innovations such as the Easy Start system. This feature makes starting the trimmer straightforward, requiring less effort than traditional pull-start mechanisms. The engine is designed for easy maintenance, with accessible components that allow users to perform routine checks and repairs without hassle.

Additionally, the FX26 is engineered for durability. The materials used in its construction are robust and resistant to wear and tear, ensuring that the trimmer can withstand regular use in demanding conditions. Its lightweight design, combined with its rugged construction, makes it an ideal choice for those looking for a reliable and efficient trimmer.

Overall, the Weed Eater FX26 is a powerful, user-friendly option that meets the needs of both casual users and landscaping professionals. With its combination of performance, comfort, and innovative features, it is an excellent addition to any gardening toolkit. Whether you’re maintaining your yard or tackling larger landscaping projects, the FX26 offers the reliability and efficiency needed for successful outdoor work.