HOW to Stop Your Unit, HOW to Start Your Unit

moisture absorption into the fuel/oil mixture leading to oil and fuel separation.

HELPFUL TIP

If your engine switch reads “push to stop”, it is always in the ON position.

HOW TO STOP YOUR UNIT

STo stop the engine, push and hold the STOP switch in the STOP position until the engine stops.

SIf engine does not stop, move choke to the FULL CHOKE position.

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

1.Set unit on a flat surface.

2.Slowly press the primer bulb 6 times.

3.Move choke lever to the FULL CHOKE position.

4.Squeeze the throttle trigger fully and hold through all remaining steps.

Primer Bulb

Choke

Lever

Starter Handle

5.Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times.

6.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position.

7.Pull starter rope sharply until engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the start- er rope until the engine runs, but no more than 6 pulls. If the engine still doesn’t start, it is probably flooded. Proceed to

STARTING A FLOODED ENGINE.

8.Once the engine starts, allow it to run 10 se- conds, then move the choke lever to the RUN position. Allow the unit to run for 30 more seconds at RUN before releasing the throttle trigger.

NOTE: If engine dies with the choke le- ver in the RUN position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move the choke lever to the HALF CHOKE position.

2.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the en- gine runs smoothly.

3.Pull starter rope sharply until engine runs, but no more than 6 pulls.

4.Allow engine to run 15 seconds, then move the choke lever to RUN.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the RUN position; then, pull the rope to clear the engine of excess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded. If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

FX26 specifications

The Weed Eater FX26 is a versatile and powerful tool designed for both homeowners and professionals who need an efficient solution for landscaping, lawn maintenance, and garden upkeep. Known for its reliability and ease of use, the FX26 stands out in the market of gas-powered trimmers.

One of the primary features of the FX26 is its robust 26cc, 2-cycle engine. This engine offers a perfect balance between power and lightweight design, making it easier to maneuver compared to heavier models. The power provided by the engine enables it to tackle tougher weeds and grass with minimal effort, ensuring a clean and precise cutting experience.

The mechanism of the FX26 includes a dual line feed system, which allows for an efficient trimming process. The design promotes a continuous and smooth performance, as the trimmer automatically feeds more line as you work. This means that users can focus on their cutting tasks without interruptions to change the trimmer line, making the process more efficient and less time-consuming.

Another notable characteristic of the Weed Eater FX26 is its adjustable handle. Designed for user comfort, it allows for operation in various positions, ensuring that users can find a comfortable grip that reduces fatigue during extended use. The handle's ergonomic design contributes to the overall user experience, allowing homeowners and professionals to work for longer periods without discomfort.

In terms of technology, the FX26 incorporates innovations such as the Easy Start system. This feature makes starting the trimmer straightforward, requiring less effort than traditional pull-start mechanisms. The engine is designed for easy maintenance, with accessible components that allow users to perform routine checks and repairs without hassle.

Additionally, the FX26 is engineered for durability. The materials used in its construction are robust and resistant to wear and tear, ensuring that the trimmer can withstand regular use in demanding conditions. Its lightweight design, combined with its rugged construction, makes it an ideal choice for those looking for a reliable and efficient trimmer.

Overall, the Weed Eater FX26 is a powerful, user-friendly option that meets the needs of both casual users and landscaping professionals. With its combination of performance, comfort, and innovative features, it is an excellent addition to any gardening toolkit. Whether you’re maintaining your yard or tackling larger landscaping projects, the FX26 offers the reliability and efficiency needed for successful outdoor work.