Checking the programmed data
➩Press the „M“ button twice. The current programming is shown in the display y.
➩Press the 
button to switch through the programme.
➩To leave the
button until a bar appears over | in the display y. |
The watering computer is once again operating in automatic mode.
Deleting Programmed Data
➩ Press the „M“ button until a bar is shown over in the display y.
➩Press the 
button until the number of the desired programme blinks in the display y.
➩Press the 
button.
The programme is deleted and the programmed time is no longer shown in the display y.
➩Continue to press the „M“ button until a bar appears over the in the display y.
- 12 -