➩Press the „+“ button or the
➩Confirm your selection with the button.
The minute value now blinks in the display y.
➩Press the „+“ button or the
➩Confirm your selection with the button.
The clock is now set.
➩Press the „M“ button to return to automatic mode.
Operate
Programming
You can programme up to 8 switching sequences with different amounts of water
➩ Press the „M“ button until a bar is shown above the in the display y.
The watering computer is now in the programming mode. Blinking in the display y, to the right of the % symbol, is the notification 100%.
- 7 -